CAMLOG Product Catalog

Valid from May 2024 Product Catalog CAMLOG® Implant System

CAMLOG® Product Catalog 2024 | 1 Service Clinical evidence and Science 2 System information The CAMLOG® Implant System 3 Surgery Planning 18 PROGRESSIVE-LINE Implants and instruments 20 PROGRESSIVE-LINE Guide System instruments 26 PROGRESSIVE-LINE Flex instruments 33 SCREW-LINE Implants and instruments 37 SCREW-LINE Guide System instruments 45 General surgical instruments 48 SCREW-LINE Osteotomy Set 54 Cover screws 59 Healing caps 59 Prosthetics Scanbodies 64 Impression taking 65 Bite registration 66 Cast fabrication 67 Temporary restoration 68 Titanium bases CAD/CAM 69 Titanium bases CAD/CAM free 70 CAM blanks 71 Esthomic® Abutments 73 Universal abutments 75 Gold-plastic abutments 75 COMFOUR® 76 Ball abutment 81 Locator® 82 Locator R-Tx® 84 Double crown restoration 86 Abutment and lab screws 87 Prosthetic instruments 88 Instruments for dental technicians 91 Selection abutments 92 Auxiliary article Implants for practice 94 Insertion posts 94 Demonstration models 95 Macro models 95 Literature 96 Additional information Indication overview 98 Implant overview 100 Prosthetics overview 101 Screw overview 110 Overview tightening torque 114 Materials 118 Additional documentation Further documentation 121 Legal 121 Content

2 | CAMLOG® Product Catalog 2024 Clinical evidence and Science www.biohorizonscamlog.com/clinical-evidence-and-science From the beginning, the Camlog company has set high standards in scientific documentation of all essential properties of their implant systems. In Clinical evidence and Science, we have summarized the current state of research on Camlog Implant Systems. We are happy to pass on this concentrated knowledge to you. You are also welcome to request a printed version.

CAMLOG® Product Catalog 2024 | 3 System information The CAMLOG® Implant System has been developed on the basis of many years of clinical and laboratory experience. It is a user-friendly, consistently prosthetically oriented implant system. All CAMLOG® Products are manufactured with the latest state-of-the-art technology. The CAMLOG® Implant System is continuously being developed by the company’s research and development team in collaboration with clinicians, universities and dental technicians and therefore stays abreast of the latest technology. The CAMLOG® and CONELOG® Implant Systems are very well documented scientifically. Studies* support this with respect to many parameters including the implant surface, time of implantation and/or implant loading, primary stability, and the connection design. * See “Further documentation” on page 121 The CAMLOG® Implant System

4 | CAMLOG® Product Catalog 2024 Promote® Surface CAMLOG® Implants are available with the abrasive-blasted, acid-etched Promote® Surface. The surface is based on current scientific knowledge and supports rapid osseointegration. Scientific results from studies with cell cultures, osteohistology and in pull-out trials illustrate this impressively.3* * See “Further documentation” on page 121 CAMLOG® PROGRESSIVE-LINE Implants The CAMLOG® PROGRESSIVE-LINE Implants make it easier to implement modern treatment concepts such as immediate restorations or immediate loading, which require high primary stability.1, 2* The geometry of the implant is consistently designed to develop high initial stability: The self-tapping screw implant has a conically shaped apical area that enables pronounced primary stability even in soft bone.1, 2* Thread extending to the apex for good anchorage in immediate implantations.1, 2* Crestal thread for improved hold with limited residual bone height.2* The CAMLOG® PROGRESSIVE-LINE Implants are available with the Promote® plus Surface which features a 0.4 mm high machined implant neck. Depending on the clinical situation, this surface design thus permits slightly supracrestal or epicrestal implant positioning. CAMLOG® PROGRESSIVE-LINE Implants with screw-mounted insertion post can be used for template guided implant dentistry. CAMLOG® PROGRESSIVE-LINE Implants are equipped with the proven Tube-in-Tube® Implant abutment-connection and feature three symmetrically arranged angular grooves in the cylindrical part of the implant neck. The prosthetic restoration is performed with CAMLOG® Abutments, optionally also with components for Platform Switching. * See “Further documentation” on page 121 Promote® plus 0.4 mm Implant lengths 9 mm 11 mm 13 mm 16 mm Implant diameter 3.3 mm 3.8 mm 4.3 mm 5.0 mm

CAMLOG® Product Catalog 2024 | 5 System information 0.4 mm Promote® plus 1.4 mm Promote® Implant lengths 9 mm 11 mm 13 mm 16 mm All CAMLOG® Implants are delivered pre-assembled in sterile packaging on a color-coded insertion post corresponding to the diameter. The option of Platform Switching may only be used with CAMLOG® Implants with K article numbers. Implant diameter 3.3 mm 3.8 mm 4.3 mm 5.0 mm 6.0 mm CAMLOG® SCREW-LINE Implants CAMLOG® SCREW-LINE Implants are slightly conical, self-tapping screw implants. They enable easy insertion by self-centering with continuous bone contact and thus achieve solid primary stability. CAMLOG® SCREW-LINE Implants are available with both the Promote® Surface (1.4 mm machined implant neck section) and the Promote® plus Surface (0.4 mm machined implant neck section) and thus allow maximum flexibility of the vertical implant position. Rounding of the apical geometry ensures gentle insertion of the CAMLOG® SCREW-LINE Implants into the bone, also near the maxillary sinus. CAMLOG® SCREW-LINE Implants with screw-mounted insertion post can be used for template guided implant dentistry. CAMLOG® SCREW-LINE Implants are equipped with the proven Tube-in-Tube® Implant-abutment connection and feature three symmetrically arranged angular grooves in the cylindrical part of the implant neck. The prosthetic restoration is performed with CAMLOG® Abutments, optionally also with components for Platform Switching.

6 | CAMLOG® Product Catalog 2024 Abutment Abutment screw Groove/cam design Abutment guide in the implant Upper inner thread Lower inner thread Implant Advantages and benefits of the Tube-in-Tube® connection Easy indexing due to three possible positioning of the abutments Precision, with excellent tactile feedback Platform matching and Platform Switching Defined vertical stop: no height offset across the entire workflow Scientifically documented long-term outcomes For optimal positioning of the abutments, the implant should be aligned in the bone so that one of the three grooves points in vestibular direction. With the CAMLOG® Implants, the insertion tools include markings that correspond to the three grooves of the implant inner configuration. CAMLOG® Tube-in-Tube® Implant-abutment connection The unmistakable Tube-in-Tube® principle with the three interlocking grooves and cams creates a very precise, stable, and antirotational implant-abutment-connection. This was designed biomechanically on the basis of complex finite element analyses. It has proven itself millions of times over for many years and its long-term success has been scientifically documented. The CAMLOG® Tube-in-Tube® connection has undergone extensive scientific studies and achieved above average good results for precision fit.4, 5* * See “Further documentation” on page 121 The insertion posts of the CAMLOG® Implants The PROGRESSIVE-LINE and SCREW-LINE Implants are each offered with two different versions of the insertion post. Regardless of which option you choose, the instruments used to insert the implant are identical. A separate set of instruments for guided surgery is not required. Pre-assembled transfer part – simplified application and transfer to the patient's mouth Small diameter – easier access to the interdental spaces and posterior region Color-coded insertion post according to implant diameter – provides easy orientation during surgery Can be used as a paralleling pin – for aligning the position of multiple implants Snap-in insertion post Standard insertion post: easy removal following implant surgery A predetermined breaking point protects the implant connection from excessive loading Removal adapter for removing the implant after fracture of the insertion post at the predetermined breaking point Screw-mounted insertion post For guided surgery Fixation to the implant using a screw: enables vertical adjustments of the implant position in the implant bed Removal adapter – one size for all diameters K1075.4313 QTY 1 2027-04-27 XXXXXXXXXX 2022-04-27 CAMLOG® PROGRESSIVE-LINE Implant Promote® plus CAMLOG® PROGRESSIVE-LINE Implant Promote® plus, incl. cover screw K1075.4313 2027-04-27 13 4.3 +E219K1075.43131/$$3270427XXXXXXXXXX/16D220427+ 4.3 13 4.3 mm L13 mm screw- mounted screwmounted C1065.4313 QTY 1 2027-04-27 XXXXXXXXXX 2022-04-27 CONELOG® SCREW-LINE Implant Promote® plus CONELOG® SCREW-LINE Implant Promote® plus, incl. cover screw C1065.4313 2027-04-27 13 4.3 +E219C106543131/$$3270427XXXXXXXXXX/16D220427+ 4.3 13 4.3 L13 mm screwmounted screw- mounted 1 mm 3 mm 4 mm 5 mm 6 mm

CAMLOG® Product Catalog 2024 | 7 System information CAMLOG® Prosthetic components The CAMLOG® Implants can be provided with a wide range of flexible, anatomically adapted prosthetic components. CAMLOG® Abutments are color-coded according to the implant diameters. CAMLOG® Abutments with K article numbers The abutments are extended apically in tubular shape (5.4 mm) and include three short cams in the upper section that correspond to the three grooves in the implant. When inserting the abutments, their tubular extension towards the apex affects the simple, easy and safe orientation in the longitudinal axis of the implant before the three cams lock into the grooves of the implant shoulder. The abutment is rotated until tactile engagement of the cams in the grooves of the implant. The abutment is then in the final position. The implant-abutment connection of the CAMLOG® Implant System is a largely positive-locking connection. Connection with the cam geometry was optimally designed in terms of biomechanics by applying elaborate finite element analyses. The image opposite displays the distribution of the Mises stress in the implant-abutment connection in accordance with ISO 14801 at a load of 200 N. Short cam geometry CAMLOG® Healing caps The various healing caps are used according to their indication for single and two-stage procedures. The CAMLOG® Healing caps are available in four geometries (cylindrical, wide body, wide body narrow and bottleneck). They are not antirotational and are screw-mounted in the upper inner thread of the implants. CAMLOG® Impression taking Impression taking of the CAMLOG® Implant is possible with impression posts, open or closed tray. The CAMLOG® Impression posts are color-coded according to the implant diameter and feature an emergence profile which corresponds to the shape of the healing caps and are supplied sterile. High-precision components ensure correct transfer of the intraoral situation. The antirotational mechanism is ensured by the CAMLOG® groove/cam geometry.

8 | CAMLOG® Product Catalog 2024 CAMLOG® Temporary abutments Various abutments are available for the CAMLOG® Implant System for temporary prosthetic restorations. CAMLOG® Temporary abutments made of titanium alloy (Ti-6Al-4V ELI) are available in crown and bridge versions. As an option, temporary restoration on CAMLOG® Implants can also be performed with temporary abutments made of PEEK (poly ether ether ketone). The abutments can be used in immediate implantations or after exposing the gingiva. CAMLOG® Esthomic® Abutments Anatomically preformed abutments allow for optimal stump design. The CAMLOG® Esthomic® Abutments are available both straight and angled with various gingival heights and with an oval anatomically pre-shaped shoulder profile. The angled Esthomic® Abutments are available in A and B versions differentiated by a cam offset of 60°. This results in six prosthetic-oriented rotating positions and allows perfect prosthetic alignment of the axes. CAMLOG® Esthomic® Abutment cam alignment Type A Cam alignment against the angle Type B Cam alignment in direction of the angle Type A Type B Cams with 60° offset CAMLOG® Titanium bases CAD/CAM and CAMLOG® Titanium bases CAD/CAM free CAMLOG® Titanium bases CAD/CAM and CAMLOG® Titanium bases CAD/CAM free act as a bonding basis for customized, implant-supported dental restorations made of suitable materials. Reconstructions are fabricated with the aid of CAD/ CAM techniques. CAMLOG® Titanium bases CAD/CAM are available in crown and bridge versions. CAMLOG® Titanium bases CAD/CAM free for the angled screw channel are available in the crown version in two chimney heights.

CAMLOG® Product Catalog 2024 | 9 System information CAMLOG® Universal and telescope abutments CAMLOG® Universal and telescope abutments can be used for individually fabricated cementable crown and bridge restorations and for double crown restorations. The abutments are made of titanium alloy and can be custom trimmed. CAMLOG® Ball, Locator® and straight bar abutments Ball, Locator® and straight bar abutments are available for the CAMLOG® Implant System. These differ from the abutments with abutment screw in the apical area through different connection designs. Ball, Locator® and straight bar abutments are manufactured as single units with a thread in the apical region which engages with the upper inner thread of the CAMLOG® Implant. These abutments are screwed into the CAMLOG® Implant using the corresponding insertion tools. Example: CAMLOG® Ball abutment (Ø 4.3 mm) in a CAMLOG® PROGRESSIVE-LINE Implant Screw-retained CAMLOG® abutment Inner thread CAMLOG® Implant

10 | CAMLOG® Product Catalog 2024 Platform Switching design Platform Switching (PS) is used to support the hard and soft tissue in the peri-implant esthetic region. The distance between the implant-abutment interface and the alveolar crest is increased and thereby reduces the effect of inflammatory cell infiltration with concomitant bone resorption. The option of Platform Switching may only be used with CAMLOG® Implants with K article numbers. When selecting the Platform Switching effect, the soft tissue is ideally prepared for an esthetic emergence profile by using the PS components in all treatment steps. CAMLOG® Healing caps PS, (cylindrical, wide body, bottleneck) CAMLOG® Impression posts PS, open and closed tray CAMLOG® Temporary abutments PS CAMLOG® Titanium bases CAD/CAM PS CAMLOG® Titanium bases CAD/CAM free PS CAMLOG® Esthomic® Abutments PS CAMLOG® Universal abutments PS

CAMLOG® Product Catalog 2024 | 11 System information Angled bar abutment for the COMFOUR® System, available at angles of 17° and 30° Prosthetic screw for bar abutment Anatomically adapted emergence profile, slim design COMFOUR® offers a large selection of options to manage the requirements of your practice. COMFOUR® System Titanium bonding base for all bar abutments, Passive-Fit Occlusal screw-mounted restorations are state-of-the-art. With the COMFOUR® System, edentulous patients are given the option of immediate, comfortable, and fixed dentures based on four or six implants as a rule, with a huge gain in their quality of life. Clinicians too, can look forward to considerably greater comfort and freedom. COMFOUR® provides several treatment options. In addition to occlusal screw-mounted crowns and bridges for immediate and delayed restorations, the multi-option system also permits bar restorations on straight and angled bar abutments. COMFOUR® offers a range of options to master the challenges faced in routine practice with greater ease and in less time. Next to its versatility, the COMFOUR® Prosthetic System is particularly impressive thanks to its slim design. All components are of a delicate and low design, which simplifies prosthetic restorations considerably for dentists and dental technicians. In addition, a number of technical highlights ensure that COMFOUR® is not simply just a name but also a program – for users and patients alike.

12 | CAMLOG® Product Catalog 2024 CAD/CAM Services Individually CAD/CAM fabricated prosthetics, healing caps and impression posts, scanning and design services, 3D implant planning, printed drilling templates and jaw models are available from Camlog through our DEDICAM® Service Division. Personal support with the accustomed competence of our employees as well as processes optimized right down to the finest detail ensure a high degree of certainty of results with the greatest possible individual freedom. Extensive libraries for the open CAD systems from 3Shape, exocad and Dental Wings are available for implant-supported restorations. Discover your options and start your digital future with DEDICAM®.

CAMLOG® Product Catalog 2024 | 13 System information Diameter A Apical diameter G Gingival diameter PP Prosthetic platform diameter L Length GH Gingival height PBT Polybutylene terephthalate PEEK Poly ether ether ketone POM Polyoxymethylene PPSU Polyphenylsulfone PS Platform Switching Explanation of symbols CE-label CE-label with number of the Notified Body Consult instructions for use Caution, observe the warning notices Medical Device Article number Lot number Serial number Sterilized using irradiation Single sterile barrier system with protective packaging outside Single sterile barrier Non-sterile Date of manufacture Use-by date Do not resterilize Do not reuse Do not use if package is damaged Keep away from sunlight Temperature limit Manufacturer MR-safe* MR-conditional Contains hazardous substances Caution: US Federal law restricts this device to sale by or on the order of a dentist or physician. Explanation of abbreviations Color coding of the surgical and prosthetic CAMLOG® Products 3.3 mm 3.8 mm 4.3 mm 5.0 mm 6.0 mm General safety instructions and warnings The descriptions in this product catalog are not sufficient to allow immediate use of the CAMLOG® Implant System. Instruction by a surgeon experienced in using the CAMLOG® Implant System is strongly recommended. The products may only be used by dentists, physicians, surgeons and dental technicians. Appropriate courses and training sessions are offered by Camlog if required. Methodical errors made during the treatment can result in loss of the implant and significant loss of the peri-implant bone. The images in this document are for reference purposes only and may differ from the actual product. * for non-metallic DEDICAM® Components

14 | CAMLOG® Product Catalog 2024 Packaging PROGRESSIVE-LINE Implants Secondary packaging Sealed, folding box with color-coded product label Inner Implant packaging (primary packaging) Sealed, color-coded Diameter Length Implant/surface Data matrix code Article number Use-by date Lot number Date of manufacture QR code Web address for instructions for use Example of product label for outer Implant packaging

CAMLOG® Product Catalog 2024 | 15 System information Packaging SCREW-LINE Implants Secondary packaging Sealed, folding box with color-coded product label Inner Implant packaging (primary packaging) Sealed, color-coded Example of product label for outer Implant packaging Diameter Length Implant/surface Data matrix code Article number Use-by date Lot number Date of manufacture QR code Web address for instructions for use Packaging units: unless described otherwise, each pack contains one product.

16 | CAMLOG® Product Catalog 2024 Article number UDI Code Lot number Direct part marking – better identification and traceability In future, all Camlog instruments will feature a label with the lot number and/or UDI code in addition to the article number. This makes it easier for the entire practice team to identify and assign the products. The product images contained in the catalog do not yet always reflect this specification.

Surgery CAMLOG® Product Catalog 2024 | 17 Surgery

18 | CAMLOG® Product Catalog 2024 Article Art. No. ACTUAL SIZE 25% MAGNIFICATION IMPLANT DIAGNOSTIC GRID Diameter (mm) 3.3 mm x 11 mm 3.3 mm x 13 mm 3.3 mm x 16 mm 3.8 mm x 9 mm 3.8 mm x 11 mm 3.8 mm x 13 mm 3.8 mm x 16 mm 4.3 mm x 9 mm 4.3 mm x 11 mm 4.3 mm x 13 mm 4.3 mm x 16 mm 5.0 mm x 9 mm 5.0 mm x 11 mm 5.0 mm x 13 mm 5.0 mm x 16 mm 3.3 mm x 11 mm 3.3 mm x 13 mm 3.3 mm x 16 mm 3.8 mm x 9 mm 3.8 mm x 11 mm 3.8 mm x 13 mm 3.8 mm x 16 mm 4.3 mm x 9 mm 4.3 mm x 11 mm 4.3 mm x 13 mm 4.3 mm x 16 mm 5.0 mm x 9 mm 5.0 mm x 11 mm 5.0 mm x 13 mm 5.0 mm x 16 mm X-RAY PLANNING FOIL 1.25:1 CAMLOG® PROGRESSIVE-LINE IMPLANT, PROMOTE® PLUS CAMLOG® IMPLANT DIAGNOSTIC GRID Diameter (mm) IMPLANT DIAGNOSTIC GRID Diameter (mm) IMPLANT DIAGNOSTIC GRID Diameter (mm) IMPLANT DIAGNOSTIC GRID Diameter (mm) IMPLANT DIAGNOSTIC GRID Diameter (mm) IMPLANT DIAGNOSTIC GRID Diameter (mm) IMPLANT DIAGNOSTIC GRID Diameter (mm) mm 0.5 Apical drill excess length 13 mm K5300.9014 Rev.00 03/2018 Manufacturer: ALTATEC GmbH Maybachstr. 5 71299 Wimsheim Germany Headquarters: CAMLOG Biotechnologies AG Margarethenstr. 38 4053 Basel, Switzerland info@camlog.com www.camlog.com +E219K530090141O +$0000079571O4 3.3 CORONAL 2.2 APICAL 2.2 APICAL 3.3 CORONAL L 9 3.8 CORONAL 3.0 APICAL L 11-16 3.8 CORONAL 2.7 APICAL L 9 4.3 CORONAL 3.0 APICAL L 11-16 4.3 CORONAL 2.7 APICAL L 9 5.0 CORONAL 3.5 APICAL L 11-16 5.0 CORONAL 3.2 APICAL L 9 3.8 CORONAL 3.0 APICAL L 11-16 3.8 CORONAL 2.7 APICAL L 9 4.3 CORONAL 3.0 APICAL L 9 5.0 CORONAL 3.5 APICAL L 11-16 5.0 CORONAL 3.2 APICAL L 11-16 4.3 CORONAL 2.7 APICAL X-Ray Planning foil 1.25:1 CAMLOG® PROGRESSIVE-LINE Implants Magnification 25% K5300.9014 ACTUAL SIZE 40% MAGNIFICATION IMPLANT DIAGNOSTIC GRID Diameter (mm) 3.3 mm x 11 mm 3.3 mm x 13 mm 3.3 mm x 16 mm 3.8 mm x 9 mm 3.8 mm x 11 mm 3.8 mm x 13 mm 3.8 mm x 16 mm 4.3 mm x 9 mm 4.3 mm x 11 mm 4.3 mm x 13 mm 4.3 mm x 16 mm 5.0 mm x 9 mm 5.0 mm x 11 mm 5.0 mm x 13 mm 5.0 mm x 16 mm 3.3 mm x 11 mm 3.3 mm x 13 mm 3.3 mm x 16 mm 3.8 mm x 9 mm 3.8 mm x 11 mm 3.8 mm x 13 mm 3.8 mm x 16 mm 4.3 mm x 9 mm 4.3 mm x 11 mm 4.3 mm x 13 mm 4.3 mm x 16 mm 5.0 mm x 9 mm 5.0 mm x 11 mm 5.0 mm x 13 mm 5.0 mm x 16 mm X-RAY PLANNING FOIL 1.4:1 CAMLOG® PROGRESSIVE-LINE IMPLANT, PROMOTE® PLUS CAMLOG® IMPLANT DIAGNOSTIC GRID Diameter (mm) IMPLANT DIAGNOSTIC GRID Diameter (mm) IMPLANT DIAGNOSTIC GRID Diameter (mm) IMPLANT DIAGNOSTIC GRID Diameter (mm) IMPLANT DIAGNOSTIC GRID Diameter (mm) IMPLANT DIAGNOSTIC GRID Diameter (mm) IMPLANT DIAGNOSTIC GRID Diameter (mm) mm 0.5 Apical drill excess length 13 mm K5300.9015 Rev.00 03/2018 Manufacturer: ALTATEC GmbH Maybachstr. 5 71299 Wimsheim Germany Headquarters: CAMLOG Biotechnologies AG Margarethenstr. 38 4053 Basel, Switzerland info@camlog.com www.camlog.com +E219K530090151P +$0000079572P6 3.3 CORONAL 2.2 APICAL 2.2 APICAL 3.3 CORONAL L 9 3.8 CORONAL 3.0 APICAL L 11-16 3.8 CORONAL 2.7 APICAL L 9 4.3 CORONAL 3.0 APICAL L 11-16 4.3 CORONAL 2.7 APICAL L 9 5.0 CORONAL 3.5 APICAL L 11-16 5.0 CORONAL 3.2 APICAL L 9 3.8 CORONAL 3.0 APICAL L 11-16 3.8 CORONAL 2.7 APICAL L 9 4.3 CORONAL 3.0 APICAL L 9 5.0 CORONAL 3.5 APICAL L 11-16 5.0 CORONAL 3.2 APICAL L 11-16 4.3 CORONAL 2.7 APICAL X-Ray Planning foil 1.4:1 CAMLOG® PROGRESSIVE-LINE Implants Magnification 40% K5300.9015 +E219K530090101K +$0010017460KX X-Ray Planning foil 1.25:1 CAMLOG® SCREW-LINE Implants Magnification 25% K5300.9010 +E219K530090111L +$0010017461LZ X-Ray Planning foil 1.4:1 CAMLOG® SCREW-LINE Implants Magnification 40% K5300.9011 Implant planning

Surgery CAMLOG® Product Catalog 2024 | 19 * for pilot drills J5051.2003 and pilot drills SCREW-LINE J5051.2000 CT-Planning Article Quantity Art. No. L CT-tube for drill Ø 2.0 mm*, corrugated tubing internal diameter 2.1 mm external diameter 2.5 mm Material Titanium alloy 10 A2002.2000 - 4.0 mm 10.0 mm v CT-tube for drill Ø 2.2 mm corrugated tubing internal diameter 2.3 mm external diameter 2.7 mm Material Titanium alloy 10 A2222.2200 - 4.0 mm 10.0 mm Drill for CT-tube (for A2002.2000) Material Stainless steel 1 A2050.2600 2.6 mm - Drill for CT-tube (for A2222.2200) Material Stainless steel 1 A2050.2800 2.8 mm -

20 | CAMLOG® Product Catalog 2024 PROGRESSIVE-LINE

Surgery CAMLOG® Product Catalog 2024 | 21 Article Art. No. L A CAMLOG® PROGRESSIVE-LINE Implant, Promote® plus incl. snap-in insertion post and cover screw, sterile Material Titanium Grade 4 K1076.3311 3.3 mm 11 mm 2.2 mm K1076.3313 13 mm K1076.3316 16 mm K1076.3809 3.8 mm 9 mm 3.0 mm K1076.3811 11 mm 2.7 mm K1076.3813 13 mm K1076.3816 16 mm K1076.4309 4.3 mm 9 mm 3.0 mm K1076.4311 11 mm 2.7 mm K1076.4313 13 mm K1076.4316 16 mm K1076.5009 5.0 mm 9 mm 3.5 mm K1076.5011 11 mm 3.2 mm K1076.5013 13 mm K1076.5016 16 mm With CAMLOG® PROGRESSIVE-LINE Implants with the diameters 3.8/4.3/5.0 mm, the option of Platform Switching is possible. PROGRESSIVE-LINE Implants with snap-in insertion post 0.4 mm L A Article Art. No. L A CAMLOG® PROGRESSIVE-LINE Implant, Promote® plus incl. screw-mounted insertion post and cover screw, sterile Material Titanium Grade 4 K1075.3311 3.3 mm 11 mm 2.2 mm K1075.3313 13 mm K1075.3316 16 mm K1075.3809 3.8 mm 9 mm 3.0 mm K1075.3811 11 mm 2.7 mm K1075.3813 13 mm K1075.3816 16 mm K1075.4309 4.3 mm 9 mm 3.0 mm K1075.4311 11 mm 2.7 mm K1075.4313 13 mm K1075.4316 16 mm K1075.5009 5.0 mm 9 mm 3.5 mm K1075.5011 11 mm 3.2 mm K1075.5013 13 mm K1075.5016 16 mm Implants with screw-mounted insertion post 0.4 mm L A Note Implants with the screw-mounted insertion post (Art. No. K1075.xxxx) are to be used for template-guided implant placement with the PROGRESSIVE-LINE Guide System.

22 | CAMLOG® Product Catalog 2024 * These articles are not included in the surgery set and must be ordered separately. ** only for CONELOG® PROGRESSIVE-LINE Implants length 7 mm PROGRESSIVE-LINE Surgery set CAMLOG®/CONELOG® J5070.3309 J5070.3311 J5070.3313 J5070.3316 J5070.3809 J5070.3811 J5070.3813 J5070.3816 J5015.3300 J5015.4300 J5070.3807** J5070.5007** J5070.4307** J5050.2300 J5051.2000 J5317.0502 J5317.0501 J5317.0503 J5072.3300 J5072.3800 J5072.4300 J5015.3800 J5015.3800 J5015.5000 J5300.0036 J5300.0032 J5300.0033 J5300.0037 J5002.0011* J5002.0006 J5300.0031* J5300.0022

Surgery CAMLOG® Product Catalog 2024 | 23 Note The drills are arranged and sorted in the set according to the treatment sequence. Color lines indicate the exact drilling sequence. J5300.2000 J5070.4309 J5070.4311 J5070.4313 J5070.4316 J5070.5009 J5070.5011 J5070.5013 J5070.5016 J5015.4300 J5015.0009 J5015.0011 J5015.0013 J5072.5000 J5071.3300* J5071.3800* J5071.4300* J5071.5000* J5302.0010 J5320.1030 J5015.0007 J5015.5000

24 | CAMLOG® Product Catalog 2024 PROGRESSIVE-LINE Surgery set and wash tray Article Art. No. Surgery set CAMLOG®/CONELOG® PROGRESSIVE-LINE contains all necessary surgical instruments sorted by color code, incl. torque wrench and holding key for insertion post (taps are not included) J5300.0065 Surgery wash tray CAMLOG®/CONELOG® PROGRESSIVE-LINE incl. steel pattern, without content J5300.8970 Pattern for surgery wash tray CAMLOG®/CONELOG® PROGRESSIVE-LINE Material Stainless steel J5300.1074 Preparation of the implant bed for CAMLOG® PROGRESSIVE-LINE Implants and for CONELOG® PROGRESSIVE-LINE Implants is performed with identical instruments.

Surgery CAMLOG® Product Catalog 2024 | 25 Surgical instruments Article Art. No. L Form drill PROGRESSIVE-LINE resterilizable Material Stainless steel J5070.3309 3.3 mm 9 mm J5070.3311 11 mm J5070.3313 13 mm J5070.3316 16 mm J5070.3809 3.8 mm 9 mm J5070.3811 11 mm J5070.3813 13 mm J5070.3816 16 mm J5070.4309 4.3 mm 9 mm J5070.4311 11 mm J5070.4313 13 mm J5070.4316 16 mm J5070.5009 5.0 mm 9 mm J5070.5011 11 mm J5070.5013 13 mm J5070.5016 16 mm Depth stop for form drills SCREW-LINE (can also be used for form drills PROGRESSIVE-LINE), resterilizable Material Titanium alloy J5015.3300 3.3 mm - J5015.3800 3.8 mm J5015.4300 4.3 mm J5015.5000 5.0 mm Dense bone drill PROGRESSIVE-LINE resterilizable Material Stainless steel J5072.3300 3.3 mm - J5072.3800 3.8 mm J5072.4300 4.3 mm J5072.5000 5.0 mm Dense bone drill 2 PROGRESSIVE-LINE resterilizable Material Stainless steel J5072.3302 3.3 mm - J5072.3802 3.8 mm J5072.4302 4.3 mm J5072.5002 5.0 mm Tap PROGRESSIVE-LINE resterilizable Material Stainless steel J5071.3300 3.3 mm - J5071.3800 3.8 mm J5071.4300 4.3 mm J5071.5000 5.0 mm Paralleling pin with depth marks (for pilot drilling Ø 2.0 mm) Material Titanium alloy J5300.2000 - -

26 | CAMLOG® Product Catalog 2024 PROGRESSIVE-LINE Guide System

Surgery CAMLOG® Product Catalog 2024 | 27 3D implant planning, creation of drilling template designs and drilling templates are available from our CAD/CAM DEDICAM® Service Division. DEDICAM® Services are not available in all countries. Please ask your local BioHorizons/Camlog representative for details.

28 | CAMLOG® Product Catalog 2024 PROGRESSIVE-LINE Guide System Surgery tray CAMLOG®/CONELOG® J5074.3305 J5074.3309 J5074.3311 J5074.3313 J5074.3316 J5076.3305 J5076.3309 J5076.3311 J5076.3313 J5076.3316 J5074.5005 J5074.5007 J5074.5009 J5074.5011 J5074.5013 J5074.5016 J5074.4305 J5074.4307 J5074.4309 J5074.4311 J5074.4313 J5074.4316 J5041.3304 J5041.3804 J5041.4304 J5041.5004 J5300.0031 J5317.0501 J5317.0503 J5317.0502 J5300.0033 J5300.0032 J5300.0037 J5300.0036

Surgery CAMLOG® Product Catalog 2024 | 29 Note The drills are arranged and sorted in the set according to the treatment sequence. Color lines indicate the exact drilling sequence. J5078.3309 J5078.3311 J5078.3313 J5078.3316 J5078.4307 J5078.4309 J5078.4311 J5078.4313 J5078.4316 J5078.3807 J5078.3809 J5078.3811 J5078.3813 J5078.3816 J5078.5007 J5078.5009 J5078.5011 J5078.5013 J5078.5016 J5076.4305 J5076.4307 J5076.4309 J5076.4311 J5076.4313 J5076.4316 J5076.5005 J5076.5007 J5076.5009 J5076.5011 J5076.5013 J5076.5016 J5077.3309 J5077.3311 J5077.3313 J5077.3316 J5302.0010 J5320.1030 J5076.3805 J5076.3807 J5076.3809 J5076.3811 J5076.3813 J5076.3816

30 | CAMLOG® Product Catalog 2024 PROGRESSIVE-LINE Guide System Surgery and wash tray Note Implants with the screw-mounted insertion post (Art. No. K1075.xxxx) are to be used for template-guided implant placement with the PROGRESSIVE-LINE Guide System. Article Art. No. Guide System Surgery tray CAMLOG®/CONELOG® PROGRESSIVE-LINE without content J5300.8919 Guide System Surgery wash tray CAMLOG®/CONELOG® PROGRESSIVE-LINE incl. steel pattern, without content J5300.8971 Guide System Pattern for surgery wash tray CAMLOG®/CONELOG® PROGRESSIVE-LINE Material Stainless steel J5300.1072

Surgery CAMLOG® Product Catalog 2024 | 31 Surgical instruments Article Art. No. L Guide System Gingiva punch PROGRESSIVE-LINE resterilizable Material Stainless steel J5041.3304 3.3 mm - J5041.3804 3.8 mm J5041.4304 4.3 mm J5041.5004 5.0 mm Guide System Pilot drill PROGRESSIVE-LINE resterilizable Material Stainless steel J5074.3305 3.3 mm 5 mm J5074.3309 9 mm J5074.3311 11 mm J5074.3313 13 mm J5074.3316 16 mm J5074.4305 3.8 mm 4.3 mm 5 mm J5074.4307 7 mm J5074.4309 9 mm J5074.4311 11 mm J5074.4313 13 mm J5074.4316 16 mm J5074.5005 5.0 mm 5 mm J5074.5007 7 mm J5074.5009 9 mm J5074.5011 11 mm J5074.5013 13 mm J5074.5016 16 mm Guide System Pre-drill PROGRESSIVE-LINE resterilizable Material Stainless steel J5076.3305 3.3 mm 5 mm J5076.3805 3.8 mm J5076.4305 4.3 mm J5076.5005 5.0 mm Guide System Form drill PROGRESSIVE-LINE resterilizable Material Stainless steel J5076.3311 3.3 mm 11 mm J5076.3313 13 mm J5076.3316 16 mm J5076.3809 3.8 mm 9 mm J5076.3811 11 mm J5076.3813 13 mm J5076.3816 16 mm J5076.4309 4.3 mm 9 mm J5076.4311 11 mm J5076.4313 13 mm J5076.4316 16 mm J5076.5009 5.0 mm 9 mm J5076.5011 11 mm J5076.5013 13 mm J5076.5016 16 mm

32 | CAMLOG® Product Catalog 2024 PROGRESSIVE-LINE Guide System Surgical instruments * The sleeves are not compatible with the SCREW-LINE Guide System. Article Art. No. L Guide System dense bone drill PROGRESSIVE-LINE resterilizable Material Stainless steel J5078.3311 3.3 mm 11 mm J5078.3313 13 mm J5078.3316 16 mm J5078.3809 3.8 mm 9 mm J5078.3811 11 mm J5078.3813 13 mm J5078.3816 16 mm J5078.4309 4.3 mm 9 mm J5078.4311 11 mm J5078.4313 13 mm J5078.4316 16 mm J5078.5009 5.0 mm 9 mm J5078.5011 11 mm J5078.5013 13 mm J5078.5016 16 mm Guide System Form drill for Ø 3.8 mm under preparation PROGRESSIVE-LINE resterilizable Material Stainless steel J5077.3309 3.3 mm 9 mm J5077.3311 11 mm J5077.3313 13 mm J5077.3316 16 mm Guide System Guiding sleeve PROGRESSIVE-LINE 2 units Material Titanium alloy J3754.3301* 3.3 mm - J3754.3801* 3.8 mm J3754.4301* 4.3 mm J3754.5001* 5.0 mm

Surgery CAMLOG® Product Catalog 2024 | 33 PROGRESSIVE-LINE Flex

34 | CAMLOG® Product Catalog 2024 PROGRESSIVE-LINE Flex Surgery set CAMLOG®/CONELOG® J5080.3300 J5300.0022 J5300.0033 J5317.0501 J5050.2300 J5051.2000 J5079.3300 J5079.3800 J5080.3800 J5080.4300 J5080.5000 J5002.0013

Surgery CAMLOG® Product Catalog 2024 | 35 J5300.0036 J5317.0504 J5002.0006 J5302.0010 J5079.4300 J5079.5000 J5300.2000 J5320.1030 J5072.3800 J5072.3300 J5072.4300 J5072.5000 Note The drills are arranged and sorted in the set according to the treatment sequence. Color lines indicate the exact drilling sequence.

36 | CAMLOG® Product Catalog 2024 Article Art. No. L Drill PROGRESSIVE-LINE Flex resterilizable Material Stainless steel J5079.3300 3.3 mm - J5079.3800 3.8 mm J5079.4300 4.3 mm J5079.5000 5.0 mm Profile drill PROGRESSIVE-LINE Flex resterilizable Material Stainless steel J5080.3300 3.3 mm - J5080.3800 3.8 mm J5080.4300 4.3 mm J5080.5000 5.0 mm Dense bone drill PROGRESSIVE-LINE resterilizable Material Stainless steel J5072.3300 3.3 mm - J5072.3800 3.8 mm J5072.4300 4.3 mm J5072.5000 5.0 mm Dense bone drill 2 PROGRESSIVE-LINE resterilizable Material Stainless steel J5072.3302 3.3 mm - J5072.3802 3.8 mm J5072.4302 4.3 mm J5072.5002 5.0 mm Tap PROGRESSIVE-LINE resterilizable Material Stainless steel J5071.3300 3.3 mm - J5071.3800 3.8 mm J5071.4300 4.3 mm J5071.5000 5.0 mm Wrench adapter Material Stainless steel J5002.0013 - 12.5 mm PROGRESSIVE-LINE Flex Surgery set Surgical instruments Article Art. No. Surgery set CAMLOG®/CONELOG® PROGRESSIVE-LINE Flex contains all necessary surgical instruments sorted by color code, incl. torque wrench and holding key for insertion post J5300.0071

Surgery CAMLOG® Product Catalog 2024 | 37 SCREW-LINE

38 | CAMLOG® Product Catalog 2024 SCREW-LINE Implants with snap-in insertion post Article Art. No. L A CAMLOG® SCREW-LINE Implant, Promote® incl. snap-in insertion post and cover screw, sterile Material Titanium Grade 4 K1046.3311 3.3 mm 11 mm 2.7 mm K1046.3313 13 mm K1046.3316 16 mm K1046.3809 3.8 mm 9 mm 3.5 mm K1046.3811 11 mm K1046.3813 13 mm K1046.3816 16 mm K1046.4309 4.3 mm 9 mm 3.9 mm K1046.4311 11 mm K1046.4313 13 mm K1046.4316 16 mm K1046.5009 5.0 mm 9 mm 4.6 mm K1046.5011 11 mm K1046.5013 13 mm K1046.5016 16 mm K1046.6009 6.0 mm 9 mm 5.5 mm K1046.6011 11 mm K1046.6013 13 mm K1046.6016 16 mm CAMLOG® SCREW-LINE Implant, Promote® plus incl. snap-in insertion post and cover screw, sterile Material Titanium Grade 4 K1056.3311 3.3 mm 11 mm 2.7 mm K1056.3313 13 mm K1056.3316 16 mm K1056.3809 3.8 mm 9 mm 3.5 mm K1056.3811 11 mm K1056.3813 13 mm K1056.3816 16 mm K1056.4309 4.3 mm 9 mm 3.9 mm K1056.4311 11 mm K1056.4313 13 mm K1056.4316 16 mm K1056.5009 5.0 mm 9 mm 4.6 mm K1056.5011 11 mm K1056.5013 13 mm K1056.5016 16 mm K1056.6009 6.0 mm 9 mm 5.5 mm K1056.6011 11 mm K1056.6013 13 mm K1056.6016 16 mm 0.4 mm L A 1.4 mm L A

Surgery CAMLOG® Product Catalog 2024 | 39 Article Art. No. L A CAMLOG® SCREW-LINE Implant, Promote® incl. screw-mounted insertion post and cover screw, sterile Material Titanium Grade 4 K1045.3311 3.3 mm 11 mm 2.7 mm K1045.3313 13 mm K1045.3316 16 mm K1045.3809 3.8 mm 9 mm 3.5 mm K1045.3811 11 mm K1045.3813 13 mm K1045.3816 16 mm K1045.4309 4.3 mm 9 mm 3.9 mm K1045.4311 11 mm K1045.4313 13 mm K1045.4316 16 mm K1045.5009 5.0 mm 9 mm 4.6 mm K1045.5011 11 mm K1045.5013 13 mm CAMLOG® SCREW-LINE Implant, Promote® plus incl. screw-mounted insertion post and cover screw, sterile Material Titanium Grade 4 K1055.3311 3.3 mm 11 mm 2.7 mm K1055.3313 13 mm K1055.3316 16 mm K1055.3809 3.8 mm 9 mm 3.5 mm K1055.3811 11 mm K1055.3813 13 mm K1055.3816 16 mm K1055.4309 4.3 mm 9 mm 3.9 mm K1055.4311 11 mm K1055.4313 13 mm K1055.4316 16 mm K1055.5009 5.0 mm 9 mm 4.6 mm K1055.5011 11 mm K1055.5013 13 mm Implants with screw-mounted insertion post 1.4 mm L A 0.4 mm L A Note Implants with the screw-mounted insertion post (Art. No. K1045.xxxx/K1055.xxxx) are to be used for template-guided implant insertion with the SCREW-LINE Guide System. The SCREW-LINE Guide System can only be used for implant diameters 3.3/3.8/4.3 mm.

40 | CAMLOG® Product Catalog 2024 SCREW-LINE Surgery set CAMLOG®/CONELOG® * This article is not included in the surgery set and must be ordered separately. ** only for CONELOG® SCREW-LINE Implants length 7 mm J5317.0502 J5062.3309 J5062.3311 J5062.3313 J5062.3316 J5062.3809 J5062.3811 J5062.3813 J5062.3816 J5317.0501 J5050.2300 J5051.2800 J5051.2000 J5317.0503 J5054.3809 J5054.3309 J5053.3316 J5062.3807** J5062.5007** J5062.4307** J5015.3300 J5015.4300 J5015.3800 J5015.5000 J5015.3800 J5002.0011 J5300.0022 J5002.0006 J5322.0010 J5322.0011 J5300.0032 J5300.0033 J5300.0036 J5300.0037 J5300.0031*

Surgery CAMLOG® Product Catalog 2024 | 41 Note The drills are arranged and sorted in the set according to the treatment sequence. Color lines indicate the exact drilling sequence. J5300.2028 J5015.0009 J5015.0011 J5015.0013 J5054.5009 J5054.6009* J5054.4309 J5053.5016 J5053.6016* J5053.4316 J5053.3816 J5302.0010 J5320.1030 J5015.0007 J5062.6009* J5062.6011* J5062.6013* J5062.6016* J5062.4309 J5062.4311 J5062.4313 J5062.4316 J5062.5009 J5062.5011 J5062.5013 J5062.5016 J5015.4300 J5015.5000 J5015.6000*

42 | CAMLOG® Product Catalog 2024 SCREW-LINE Surgery set and wash tray Preparation of the implant bed for CAMLOG® SCREW-LINE Implants and for CONELOG® SCREW-LINE Implants is performed with identical instruments. Article Art. No. Surgery set CAMLOG®/CONELOG® SCREW-LINE contains all necessary surgical instruments sorted by color code, incl. torque wrench and holding key for insertion post (drills and taps for Ø 6.0 mm are not included) J5300.0063 Surgery wash tray CAMLOG®/CONELOG® SCREW-LINE incl. steel pattern, without content J5300.8968 Pattern for surgery wash tray CAMLOG®/CONELOG® SCREW-LINE Material Stainless steel J5300.1073

Surgery CAMLOG® Product Catalog 2024 | 43 Surgical instruments Article Art. No. L Form drill SCREW-LINE resterilizable Material Stainless steel J5062.3309 3.3 mm 9 mm J5062.3311 11 mm J5062.3313 13 mm J5062.3316 16 mm J5062.3809 3.8 mm 9 mm J5062.3811 11 mm J5062.3813 13 mm J5062.3816 16 mm J5062.4309 4.3 mm 9 mm J5062.4311 11 mm J5062.4313 13 mm J5062.4316 16 mm J5062.5009 5.0 mm 9 mm J5062.5011 11 mm J5062.5013 13 mm J5062.5016 16 mm J5062.6009 6.0 mm 9 mm J5062.6011 11 mm J5062.6013 13 mm J5062.6016 16 mm Depth stop for form drills SCREW-LINE (can also be used for form drills PROGRESSIVE-LINE), resterilizable Material Titanium alloy J5015.3300 3.3 mm - J5015.3800 3.8 mm J5015.4300 4.3 mm J5015.5000 5.0 mm J5015.6000 6.0 mm Form drill SCREW-LINE cortical bone resterilizable Material Stainless steel J5053.3316 3.3 mm - J5053.3816 3.8 mm J5053.4316 4.3 mm J5053.5016 5.0 mm J5053.6016 6.0 mm Tap SCREW-LINE with hexagon, resterilizable Material Stainless steel J5054.3309 3.3 mm - J5054.3809 3.8 mm J5054.4309 4.3 mm J5054.5009 5.0 mm J5054.6009 6.0 mm

44 | CAMLOG® Product Catalog 2024

Surgery CAMLOG® Product Catalog 2024 | 45 SCREW-LINE Guide System 3D implant planning, creation of drilling template designs and drilling templates are available from our CAD/CAM DEDICAM® Service Division. DEDICAM® Services are not available in all countries. Please ask your local BioHorizons/Camlog representative for details.

46 | CAMLOG® Product Catalog 2024 SCREW-LINE Guide System Surgical instruments Note Implants with the screw-mounted insertion post (Art. No. K1045.xxxx/K1055.xxxx) are to be used for template-guided implant insertion with the SCREW-LINE Guide System. The SCREW-LINE Guide System can only be used for implant diameters 3.3/3.8/4.3 mm. * Necessary Guide System pilot drill for implant length 16 mm, following obligatory prior use of the pilot drill set length 13 mm. ** All Guide System pilot drill sets include a 5 mm long pilot drill, as well as all pilot drills necessary for the selected implant length. *** N ecessary Guide System form drill for implant length 16 mm, following obligatory prior use of the Guide System surgery set length 13 mm. **** All Guide System surgery sets include a 5 mm long pre-drill, as well as all form drills necessary for the selected implant length. All Guide System drills and gingiva punches for SCREW-LINE are intended for single use only. Article Art. No. L Guide System Pilot drill set internal irrigation, sterile (for pilot drilling Ø 2.0 mm) Material Stainless steel J5063.3311 3.3 mm 11 mm (incl. 5 and 9 mm)** J5063.3313 13 mm (incl. 5, 9 and 11 mm)** J5064.3316* 16 mm J5063.4309 3.8 mm 9 mm (incl. 5 mm)** 4.3 mm J5063.4311 3.8 mm 11 mm (incl. 5 and 9 mm)** 4.3 mm J5063.4313 3.8 mm 13 mm (incl. 5, 9 and 11 mm)** 4.3 mm J5064.4316* 3.8 mm 16 mm 4.3 mm Guide System Surgery set SCREW-LINE internal irrigation, sterile Material Stainless steel J5065.3311 3.3 mm 11 mm (incl. 5 and 9 mm)**** J5065.3313 13 mm (incl. 5, 9 and 11 mm)**** J5066.3316*** 16 mm J5065.3809 3.8 mm 9 mm (incl. 5 mm)**** J5065.3811 11 mm (incl. 5 and 9 mm)**** J5065.3813 13 mm (incl. 5, 9 and 11 mm)**** J5066.3816*** 16 mm J5065.4309 4.3 mm 9 mm (incl. 5 mm)**** J5065.4311 11 mm (incl. 5 and 9 mm)**** J5065.4313 13 mm (incl. 5, 9 and 11 mm)**** J5066.4316*** 16 mm

Surgery CAMLOG® Product Catalog 2024 | 47 Article Art. No. L Guide System Form drill SCREW-LINE Cortical bone internal irrigation, sterile Material Stainless steel J5068.3311 3.3 mm 11 mm J5068.3313 13 mm J5068.3316 16 mm J5068.3809 3.8 mm 9 mm J5068.3811 11 mm J5068.3813 13 mm J5068.3816 16 mm J5068.4309 4.3 mm 9 mm J5068.4311 11 mm J5068.4313 13 mm J5068.4316 16 mm Guide System Gingiva punch sterile Material Stainless steel J5041.3303 3.3 mm - J5041.3803 3.8 mm J5041.4303 4.3 mm Guide System Guiding sleeve height 3.0 mm 2 units Material Titanium alloy J3734.3303* 3.3 mm - J3734.3803* 3.8 mm J3734.4303* 4.3 mm Drill extension ISO shaft, for instruments with internal irrigation Material Stainless steel J5002.0005 - 26.6 mm * The sleeves are not compatible with the PROGRESSIVE-LINE Guide System. All Guide System drills and gingiva punches for SCREW-LINE are intended for single use only.

48 | CAMLOG® Product Catalog 2024 General surgical instruments

Surgery CAMLOG® Product Catalog 2024 | 49 Article Art. No. L Round bur resterilizable Material Stainless steel J5050.2300 2.3 mm - Point drill resterilizable Material Stainless steel J5051.1500 1.5 mm - Pilot drill without coil, resterilizable Material Stainless steel J5051.2003 2.0 mm - Pilot drill SCREW-LINE (can also be used for the PROGRESSIVE-LINE), resterilizable Material Stainless steel J5051.2000 2.0 mm - Pre-drill SCREW-LINE resterilizable Material Stainless steel J5051.2800 1.7–2.8 mm - Depth stop SCREW-LINE for pilot drill (J5051.2000) and pre-drill (J5051.2800) with reduced coil, resterilizable Material Stainless steel J5015.0009 - 9 mm J5015.0011 11 mm J5015.0013 13 mm Bone profiler Material Stainless steel Ø 5.0 mm J5003.3350* 3.3 mm - Ø 6.0 mm J5003.4360* 3.8 mm 4.3 mm Ø 7.0 mm J5003.5070* 5.0 mm CAMLOG® Guiding pin for bone profiler Material Titanium alloy J5002.3300 3.3 mm - J5002.3800 3.8 mm J5002.4300 4.3 mm J5002.5000 5.0 mm General surgical instruments * Always to be used in conjunction with the matching guiding pin!

50 | CAMLOG® Product Catalog 2024 Article Size Art. No. Dimension Countersink Material Stainless steel Ø 4.6 mm - J5006.3346 3.3 mm - Ø 5.2 mm J5006.3852 3.8 mm Ø 5.6 mm J5006.4356 4.3 mm Ø 6.3 mm J5006.5063 5.0 mm Baring drill for cover screw Material Stainless steel - J5004.3300 3.3 mm - J5004.3800 3.8 mm J5004.4300 4.3 mm J5004.5000 5.0 mm Paralleling pin SCREW-LINE with depth marks Material Titanium alloy - J5300.2028 - Ø 1.7– 2.8 mm/ 2.0 mm Drill extension ISO shaft (not for drills with internal irrigation) Material Stainless steel - J5002.0006 - 26.5 mm Tap adapter for tap SCREW-LINE Material Stainless steel short J5322.0010 - 18.0 mm long J5322.0011 - 23.0 mm Removal adapter for implants with snap-in insertion posts Material Stainless steel - J5300.0022* 3.3 mm 6.2 mm 3.8 mm 4.3 mm 5.0 mm General surgical instruments * only for use with CAMLOG® PROGRESSIVE-LINE Implants with Art. No. K1076.xxxx and CAMLOG® SCREW-LINE Implants with Art. No. K1046.xxxx and K1056.xxxx

Surgery CAMLOG® Product Catalog 2024 | 51 Article Size Art. No. Dimension Driver for screw implants, manual/wrench Material Stainless steel extra short J5300.0031 13.7 mm short J5300.0032 19.2 mm long J5300.0033 24.8 mm Driver for screw implants, with ISO shaft for angled hand piece (without hexagon at the shaft) Material Stainless steel short J5300.0036 19.1 mm long J5300.0037 28.2 mm Driver for screw implants, with ISO shaft for angled hand piece, for Hexagon clamping system Material Stainless steel short J5300.0034 19.1 mm long J5300.0035 28.2 mm Torque wrench Material Stainless steel - J5320.1030 - Torque wrench 10–70 Ncm Material Stainless steel - J5320.1070 - PickUp instrument holder for carrying implants Material Stainless steel - J5300.0030 - Adapter ISO shaft for angled hand piece Material Stainless steel - J5002.0011 21.0 mm Holding key for insertion post Material Stainless steel - J5302.0010 -

52 | CAMLOG® Product Catalog 2024 Article Size Art. No. Dimension Adapter for CAMLOG® Implants Material Stainless steel short K5302.3311 3.3 mm 29.8 mm K5302.3811 3.8 mm K5302.4311 4.3 mm K5302.6011 5.0 mm 6.0 mm long K5302.3310 3.3 mm 34.8 mm K5302.3810 3.8 mm K5302.4310 4.3 mm Holding sleeve for implants Material Titanium alloy - J5302.3300 3.3 mm - J5302.3800 3.8 mm J5302.4300 4.3 mm J5302.5000 5.0 mm J5302.6000 6.0 mm Screwdriver hex, manual/wrench Material Stainless steel extra short J5317.0510 - 14.5 mm short J5317.0501 22.5 mm long J5317.0502 30.3 mm Screwdriver hex, ISO shaft Material Stainless steel short J5317.0504 - 18.0 mm long J5317.0503 26.0 mm Manual screwdriver, hex without wrench head connection Material Stainless steel - J5317.0511 - 23.0 mm General surgical instruments

Surgery CAMLOG® Product Catalog 2024 | 53 Article Size Art. No. L Cleaning needle for instruments with internal irrigation Material Stainless steel - J5002.0012 - Cleaning cannula for drills with internal irrigation Material Stainless steel - J5002.0020 -

54 | CAMLOG® Product Catalog 2024 SCREW-LINE Osteotomy Set

Surgery CAMLOG® Product Catalog 2024 | 55 Article Art. No. Osteotomy set CAMLOG®/CONELOG® SCREW-LINE straight convex Material Stainless steel J5418.0020 - Pre-Osteotome SCREW-LINE straight convex Material Stainless steel J5417.2800* 1.7– 2.8 mm Osteotome SCREW-LINE straight convex Material Stainless steel J5418.3300* 3.3 mm J5418.3800* 3.8 mm J5418.4300* 4.3 mm J5418.5000* 5.0 mm J5418.6000* 6.0 mm SCREW-LINE Osteotomy Set straight convex * These products are also included in the osteotomy set CAMLOG®/CONELOG® SCREW-LINE straight convex.

56 | CAMLOG® Product Catalog 2024 Article Art. No. Osteotomy set CAMLOG®/CONELOG® SCREW-LINE angled convex Material Stainless steel J5418.0030 - Pre-Osteotome SCREW-LINE straight convex Material Stainless steel J5417.2800* 1.7– 2.8 mm Osteotome SCREW-LINE angled convex Material Stainless steel J5418.3310* 3.3 mm J5418.3810* 3.8 mm J5418.4310* 4.3 mm J5418.5010* 5.0 mm J5418.6010* 6.0 mm * These products are also included in the osteotomy set CAMLOG®/CONELOG® SCREW-LINE angled convex. SCREW-LINE Osteotomy Set angled convex

Surgery CAMLOG® Product Catalog 2024 | 57 * These products are also included in the osteotomy set CAMLOG®/CONELOG® SCREW-LINE straight concave. Article Art. No. Osteotomy set CAMLOG®/CONELOG® SCREW-LINE straight concave Material Stainless steel J5420.0020 - Pre-Osteotome SCREW-LINE straight concave Material Stainless steel J5419.2800* 1.7– 2.8 mm Osteotome SCREW-LINE straight concave Material Stainless steel J5420.3300* 3.3 mm J5420.3800* 3.8 mm J5420.4300* 4.3 mm J5420.5000* 5.0 mm J5420.6000* 6.0 mm straight concave

58 | CAMLOG® Product Catalog 2024 Article Art. No. Osteotomy set CAMLOG®/CONELOG® SCREW-LINE angled concave Material Stainless steel J5420.0030 - Pre-Osteotome SCREW-LINE straight concave Material Stainless steel J5419.2800* 1.7– 2.8 mm Osteotome SCREW-LINE angled concave Material Stainless steel J5420.3310* 3.3 mm J5420.3810* 3.8 mm J5420.4310* 4.3 mm J5420.5010* 5.0 mm J5420.6010* 6.0 mm * These products are also included in the osteotomy set CAMLOG®/CONELOG® SCREW-LINE angled concave. SCREW-LINE Osteotomy Set angled concave

Surgery CAMLOG® Product Catalog 2024 | 59 Cover screws and healing caps

60 | CAMLOG® Product Catalog 2024 Healing caps Standard: cylindrical, wide body and wide body, narrow emergence The implant cover screws are for single use only and must not be resterilized. Article Art. No. GH G GH G CAMLOG® Healing cap, cylindrical sterile Material Titanium alloy J2015.3320 3.3 mm 2.0 mm 3.5 mm J2015.3340 4.0 mm 3.5 mm J2015.3360 6.0 mm 3.5 mm J2015.3820 3.8 mm 2.0 mm 4.0 mm J2015.3840 4.0 mm 4.0 mm J2015.3860* 6.0 mm 4.0 mm J2015.4320 4.3 mm 2.0 mm 4.5 mm J2015.4340 4.0 mm 4.5 mm J2015.4360* 6.0 mm 4.5 mm J2015.5020 5.0 mm 2.0 mm 5.2 mm J2015.5040 4.0 mm 5.2 mm J2015.5060* 6.0 mm 5.2 mm J2015.6020 6.0 mm 2.0 mm 6.2 mm J2015.6040 4.0 mm 6.2 mm J2015.6060* 6.0 mm 6.2 mm CAMLOG® Healing cap, wide body sterile Material Titanium alloy J2014.3320 3.3 mm 2.0 mm 4.4 mm J2014.3340 4.0 mm 4.5 mm J2014.3820 3.8 mm 2.0 mm 4.9 mm J2014.3840 4.0 mm 5.0 mm J2014.3860 6.0 mm 5.0 mm J2014.4320 4.3 mm 2.0 mm 5.4 mm J2014.4340 4.0 mm 5.5 mm J2014.4360 6.0 mm 5.5 mm J2014.5020 5.0 mm 2.0 mm 6.1 mm J2014.5040 4.0 mm 6.2 mm J2014.5060 6.0 mm 6.2 mm J2014.6020 6.0 mm 2.0 mm 7.1 mm J2014.6040 4.0 mm 7.2 mm J2014.6060 6.0 mm 7.2 mm CAMLOG® Healing cap, wide body, narrow emergence sterile Material Titanium alloy J2024.3340 3.3 mm 4.0 mm 4.5 mm J2024.3360 6.0 mm 4.5 mm J2024.3840 3.8 mm 4.0 mm 5.0 mm J2024.3860 6.0 mm 5.0 mm J2024.4340 4.3 mm 4.0 mm 5.5 mm J2024.4360 6.0 mm 5.5 mm J2024.5040 5.0 mm 4.0 mm 6.2 mm J2024.5060 6.0 mm 6.2 mm J2024.6040 6.0 mm 4.0 mm 7.2 mm J2024.6060 6.0 mm 7.2 mm G GH G GH Cover screws Article Art. No. CAMLOG® Implant cover screw Material Titanium alloy J2019.3300 3.3 mm J2019.3800 3.8 mm J2019.4300 4.3 mm J2019.5000 5.0 mm J2019.6000 6.0 mm New

Surgery CAMLOG® Product Catalog 2024 | 61 Healing caps Platform Switching Article Art. No. GH G CAMLOG® Healing cap PS, cylindrical sterile, for Platform Switching with CAMLOG® Implants with K article numbers Material Titanium alloy K2005.3820 3.8 mm 2.0 mm 3.3 mm K2005.3840 4.0 mm 3.3 mm K2005.3860* 6.0 mm 3.3 mm K2005.4320 4.3 mm 2.0 mm 3.8 mm K2005.4340 4.0 mm 3.8 mm K2005.4360* 6.0 mm 3.8 mm K2005.5020 5.0 mm 2.0 mm 4.4 mm K2005.5040 4.0 mm 4.4 mm K2005.5060* 6.0 mm 4.4 mm K2005.6020 6.0 mm 2.0 mm 5.1 mm K2005.6040 4.0 mm 5.1 mm K2005.6060* 6.0 mm 5.1 mm CAMLOG® Healing cap PS, wide body sterile, for Platform Switching with CAMLOG® Implants with K article numbers Material Titanium alloy K2004.3840 3.8 mm 4.0 mm 5.0 mm K2004.3860 6.0 mm 5.0 mm K2004.4340 4.3 mm 4.0 mm 5.5 mm K2004.4360 6.0 mm 5.5 mm K2004.5040 5.0 mm 4.0 mm 6.2 mm K2004.5060 6.0 mm 6.2 mm K2004.6040 6.0 mm 4.0 mm 7.2 mm K2004.6060 6.0 mm 7.2 mm G GH G GH * suitable for bite registration Healing caps are for single use only and must not be resterilized. Customized healing caps are available from our DEDICAM® CAD/CAM Service Division. DEDICAM® Services are not available in all countries. Please ask your local BioHorizons/Camlog representative for details. PS PS Article Art. No. GH G CAMLOG® Healing cap, bottleneck sterile Material Titanium alloy J2011.3340 3.3 mm 4.0 mm 3.5 mm J2011.3840 3.8 mm 4.0 mm 4.0 mm J2011.3860 6.0 mm 4.0 mm J2011.4340 4.3 mm 4.0 mm 4.5 mm J2011.4360 6.0 mm 4.5 mm J2011.5040 5.0 mm 4.0 mm 5.2 mm J2011.5060 6.0 mm 5.2 mm J2011.6040 6.0 mm 4.0 mm 6.2 mm J2011.6060 6.0 mm 6.2 mm GH G

RkJQdWJsaXNoZXIy MTE0MzMw