8 | CAMLOG® Product Catalog 2024 CAMLOG® Temporary abutments Various abutments are available for the CAMLOG® Implant System for temporary prosthetic restorations. CAMLOG® Temporary abutments made of titanium alloy (Ti-6Al-4V ELI) are available in crown and bridge versions. As an option, temporary restoration on CAMLOG® Implants can also be performed with temporary abutments made of PEEK (poly ether ether ketone). The abutments can be used in immediate implantations or after exposing the gingiva. CAMLOG® Esthomic® Abutments Anatomically preformed abutments allow for optimal stump design. The CAMLOG® Esthomic® Abutments are available both straight and angled with various gingival heights and with an oval anatomically pre-shaped shoulder profile. The angled Esthomic® Abutments are available in A and B versions differentiated by a cam offset of 60°. This results in six prosthetic-oriented rotating positions and allows perfect prosthetic alignment of the axes. CAMLOG® Esthomic® Abutment cam alignment Type A Cam alignment against the angle Type B Cam alignment in direction of the angle Type A Type B Cams with 60° offset CAMLOG® Titanium bases CAD/CAM and CAMLOG® Titanium bases CAD/CAM free CAMLOG® Titanium bases CAD/CAM and CAMLOG® Titanium bases CAD/CAM free act as a bonding basis for customized, implant-supported dental restorations made of suitable materials. Reconstructions are fabricated with the aid of CAD/ CAM techniques. CAMLOG® Titanium bases CAD/CAM are available in crown and bridge versions. CAMLOG® Titanium bases CAD/CAM free for the angled screw channel are available in the crown version in two chimney heights.
RkJQdWJsaXNoZXIy MTE0MzMw