CAMLOG® Titanium base CAD/CAM CAMLOG® Titanium base CAD/CAM PS CAMLOG® Titanium base free CAD/CAM free CAMLOG® Titanium base free CAD/CAM free PS Description Complete system with titanium base CAD/CAM abutment, modeling aid and bonding aid Complete system with titanium base CAD/CAM abutment, modeling aid and bonding aid in Platform Switching design System-independent titanium base for situations with angled screw channel (vertical angulation up to 25°) System-independent titanium base for situations with angled screw channel (vertical angulation up to 25°) in Platform Switching design Available as crown version a a a a Available as bridge version a a Available in one chimney height (4.7 mm) and one gingival height a a Available in two chimney heights (4.7 and 6.5 mm) and one gingival height a a Can be used in combination with the Sirona® Scanbody for the complete Sirona workflow a a Open system by using CAMLOG® Scanbody a a Can be used with screwdriver, hex a a a a Can be used with ballpoint screwdriver a a CAMLOG® Titanium bases CAD/CAM Overview * not for diameter 3.3 mm ** Must be used with angulated screw-channels *** Must be used with straight screw-channels * * *** ** *** **
RkJQdWJsaXNoZXIy MTE0MzMw