– 11 – Reinisch M, Koller M, Steyer E, Glockner K, Jakse N, Payer M. Prosthetic complications after artificial ageing – A study with twopiece zirconia implants. Ceramic Implants 2020;1:6-8 Sahrmann P, Luso S, Mueller C, Ender A, Attin T, Stawarczyk B, Schmidlin PR. Titanium implant characteristics after implantoplasty: An in vitro study on two different kinds of instrumentation. Int J Oral Maxillofac Implants 2019;34(6):1299-305 Wiedenmann F, Liebermann A, Spintzyk S, Eichberger M, Stawarczyk B. Influence of different cleaning procedures on tensile bond strength between zirconia abutment and titanium base. Int J Oral Maxillofac Implants 2019;34(6):1318-27 2017 – 2018 Gehrke P, Sing T, Fischer C, Spintzyk S, Geis-Gerstorfer J. Marginal and internal adaptation of hybrid abutment assemblies after central and local manufacturing, respectively. Int J Oral Maxillofac Implants 2018;33(4):808-14 Lennartz A, Dohmen A, Bishti S, Fischer H, Wolfart S. Retrievability of implant-supported zirconia restorations cemented on zirconia abutments. J Prosthet Dent. 2018;120(5):740-6 Naumova EA, Roth F, Geis B, Baulig C, Arnold WH, Piwowarczyk A. Influence of luting materials on the retention of cemented implantsupported crowns: An in vitro study. Materials (Basel) 2018; Sep 28;11(10)1853 Obermeier M, Ristow O, Erdelt K, Beuer F. Mechanical performance of cement- and screw-retained all-ceramic single crowns on dental implants. Clin Oral Invest 2018;22(2):981-91 Schmidt KE, Auschill TM, Heumann C, Frankenberger R, Eick S, Sculean A, Arweiler NB. Influence of different instrumentation modalities on the surface characteristics and biofilm formation on dental implant neck, in vitro. Clin Oral Impl Res 2017;28:483-90 Stimmelmayr M, Heiss P, Erdelt K, Schweiger J, Beuer F. Fracture resistance of different implant abutments supporting all-ceramic single crowns after aging. Int J Computerized Dent 2017:20(1):53-64 2015 – 2016 Kernen F, Benic GI, Payer M, Schär A, Müller-Gerbl M, Filippi A, Kühl S. Accuracy of three dimensional printed templates for guided implant placement based on matching a surface scan with CBCT. Clin Implant dent Relat Res 2016;18:762-8 Mehl C, Ali S, El Bahra S, Harder S, Wollrath O, Kern M. Is there a correlation between tensile strength and retrievability of cemented implant-retained crowns using artificial aging? Int J Prosthodont 2016;29:83-90 Semper Hogg W, Zulauf K, Mehrhof J, Nelson K. Influence of torque tightening on the position stability of the abutment in conical implant-abutment connection. Int J Prosthodont 2015;28:538-41 Stimmelmayr M, Beuer F, Edelhoff D, Güth JF. Implant impression techniques for the edentulous jaw: A summary of three studies. J Prosthodontics 2016:25;146-50 2014 – 2013 Mehl C, Harder S, Steiner M, Vollrath O, Kern M. Influence of cement film thickness on the retention of implantretained crowns. J Prosthodont 2013; 22:618-25 Semper-Hogg W, Kraft S, Stiller S, Mehrhof J, Nelson K. Analytical and experimental position stability of the abutment in different dental implant systems with a conical implant-abutment connection. Clin Oral Investig 2013 Apr;17(3):1017-23 2012 – 2011 Dittmer S, Dittmer MP, Kohorst P, Jendras M, Borchers L, Stiesch M. Effect of implant-abutment connection design on load bearing capacity and failure mode of implants. J Prosthodontics 2011;20:510-6 Harder S, Quabius ES, Ossenkop L, Kern M. Assessment of lipopolysaccharide microleakage at conical implantabutment connections. Clin Oral Investig 2012;16(5)1377-84 Mehl C, Harder S, Schwarz D, Steiner M, Vollrath O, Kern M. In vitro influence of ultrasonic stress, removal force preload and thermocycling on the retrievability of implant-retained crowns. Clin Oral Impl Res 2012;23:930-7 Mehl C, Harder S, Shahriari A, Steiner M, Kern M. Influence of abutment height and thermocycling on retrievability of cemented implant-supported crowns. Int J Oral Maxillofac Implants 2012;27:1106-15 Rupp F, Scheideler L, Eichler M, Geis-Gerstorfer J. Wetting behavior of dental implants. Int J Oral Maxillofac Implants 2011;26:1256-66 Semper W, Stiller S, Mehrhof J, Schmelzeisen R, Nelson K. Position accuracy of re-positioned abutments in implant systems with a tapered implant-abutment connection, Poster, 4th International Conference ADT Freiburg, May 5-8, 2011 Simeone P, Valentini PP, Pizzoferrato R, Scudieri F. Dimensional accuracy of pickup implant impression: an in vitro comparison of novel modular versus standard custom trays. Int J Oral Maxillofac Implants 2011;26:538-46 Stimmelmayr M, Edelhoff D, Güth JF, Erdelt K, Happe A, Beuer F. Wear at the titanium-titanium and the titanium-zirconia implantabutment interface: a comparative in vitro study. Dental Materials 2012;28:1215-20
RkJQdWJsaXNoZXIy MTE0MzMw