Prosthetic Solutions Catalog
Using authentic BioHorizons parts will ensure a precision fit connection between the prosthetic component and implant, avoiding costly component failures that may occur from using third-party prosthetics. Authentic BioHorizons parts are color-coded for easy identification to match the mating implant. authentic connection advantages: • lifetime warranty on all implants & prosthetics • Spiralock® technology minimizes screw loosening • precise mating geometries reduce prosthetic failures • advanced design creates a better engineered connection • color-coded prosthetic components match implant platforms For more information, visit us at www.biohorizons.com/authentic.aspx Look for this symbol from labs who use authentic BioHorizons parts. 1.5” Pantone 158C + white on bright silver foil why choose BioHorizons prosthetics?
2 shop online at store.biohorizons.com Laser-Lok microchannels is a proprietary surface treatment developed from over 25 years of research initiated to create the optimal implant surface. The establishment of a physical, connective tissue attachment to the Laser-Lok surface has generated an entirely new area of research and development: Laser-Lok applied to abutments. Through this research, the unique Laser-Lok surface has been shown to elicit a biologic response that includes the inhibition of epithelial downgrowth and the attachment of connective tissue.1-9 Laser-Lok abutments can support peri-implant health around implants without Laser-Lok. Multiple pre-clinical and clinical studies support both of these concepts.4-9 Laser-Lok® technology Histology of a Laser-Lok abutment on an RBT implant with a machined collar showing exceptional bone growth at 3 months.5 BioHorizons prosthetics are engineered and manufactured to seat precisely every time. The conical connection includes a small space between the components to guarantee contact of the abutment and implant around the entire perimeter of the prosthetic platform. This design creates a biologic seal and achieves optimal stress transmission, that protects the abutment screw from fracture and loosening. Standard abutment at 3 months Laser-Lok abutment at 3 months Laser-Lok microchannels Exposed implant collar tissue flap Comparative SEM images show the variation in tissue attachment strength on standard and Laser-Lok abutments when a tissue flap is incised vertically and manually lifted using forceps.5 engineering better prosthetics Conical connection creates a biologic seal around the perimeter of the implant's prosthetic platform
3 shop online at store.biohorizons.com customer care: 888.246.8338 L02015-017 REV C AUG 2014 Page 2 of 4 temporary restorations cement-retained crown using a PEEK temporary abutment 4 Modify the abutment Remove the marked plastic abutment from the model and place it on the abutment prepping handle using an .050” (1.25mm) hex driver and hand tighten. Modify the abutment for vertical clearance and gingival margins using a carbide or acrylic bur. Note: Replace the healing abutment immediately to prevent soft tissue collapse over the implant. 5 Seat the modified plastic abutment Verify the implant prosthetic platform is free of bone and soft tissue. Irrigate the internally-threaded connection of the implant and dry. Place the modified plastic abutment and abutment screw onto the implant using an .050” (1.25mm) hex driver and hand tighten. Take a radiograph along the long axis of the implant to ensure the abutment is seated completely onto the implant. Note: The X-ray tube must be positioned perpendicular to the implant prosthetic platform. 6 Tighten the abutment screw Tighten the abutment screws to 30 Ncm using a calibrated torque wrench and an .050” (1.25) hex driver. Apply counter-torque by grasping the abutment using an abutment clamp Note: Tightening the abutment screw to 30 Ncm is not recommended if the temporary is placed at the time of surgery. customer care: 888.246.8338 L02015-42 REV A AUG 2018 Page 1 of 4 Use this technique for the fabrication of short term (30 days), screw-retained single or multiple unit temporary restorations. This abutment is designed for chair-side restorations for developing optimal soft tissue contour and can be used when immediate load is indicated. screw-retained crown using the PEEK temporary cylinder abutment 1 Place the PEEK temporary cylinder abutment Make sure the implant prosthetic platform is free of bone and soft tissue. Snap the PEEK temporary cylinder abutment onto the implant using downward pressure. Note: Snap feature creates a friction fit which will retain the abutment without the use of an abutment screw. 2 Mark the abutment Evaluate inter-occlusal dimensions, angulation, and tissue contour. Mark the abutment for the required vertical reduction. 3 Modify the abutment Remove the marked plastic abutment and place it on the abutment prepping handle using an .050” (1.25mm) hex driver and hand tighten. Modify the abutment for vertical clearance and gingival margins using a carbide or acrylic bur. Important Maintain at least 3mm of abutment height to avoid damaging the abutment screw. component options • PEEK temporary cylinder abutments • .050” (1.25mm) hex driver • torque wrench • direct coping screws prosthetic technique manual The manual and animations are available online at www.biohorizons.com/prosthetic-techniques.aspx or on the BioHorizons app in the Prosthetics section. customer care: 888.246.8338 L02015-048 REV A AUG 2020 Page 1 of 1 The Scan Body is designed to be mounted directly on the Multi-unit abutment or Multi-unit analog using the dedicated driver. custom CAD/CAM restorations digital scanning for Multi-unit abutments 1 Secure Scan Bodies Ensure the seating surface is clean and free of residue. Seat the scan body on the multi-unit connections and hand tighten with the Scan Body Driver. IO 11B-A Elos Accurate® Scan Body for Multi-Unit Abutments C13845 Elos Accurate® Scan Body Driver component options • CAD/CAM system with BioHorizons library • Elos Accurate Scan body & Driver • Desktop scanner parts: Laboratory Scanning Workflow 2 Digitize the model Conduct the scan according to the scanner manufacturer’s instructions. Then, using the relevant digital library, align the scan body by selecting the middle of the top cutout. Note: The PXMUCC may be used as a scan body with a similar workflow to the Elos Accurate body. Blasting may be required to reduce the reflectiveness of the surface. The prosthetic technique manual provides fully illustrated step-by-step instruction for the use of BioHorizons prosthetics. The manual is intended to educate both clinicians and labs about the prosthetic options available. It is separated into technique modules that are updated frequently to describe the most current protocols used in implant dentistry. The PDF versions of these modules are further enhanced by new animated sequences of the procedures providing multiple methods of learning the content. This icon indicates a step-by-step technique module is available. interactive prosthetic technique manual
4 shop online at store.biohorizons.com Table of contents healing abutments 5 temporary abutments 6-7 impression components 8-9 custom & CAD/CAM abutments 10-13 multi-unit abutments & components 14-18 esthetic & cementable abutments 19-20 OD Secure abutments & components 21-22 Locator abutments & components 23-24 Locator R-Tx abutments & components 25 ball abutments & components 26-27 prosthetic instrumentation 28-29 prosthetic platform identification 30 support materials & references 31 ordering & warranty information 32
5 shop online at store.biohorizons.com Use Laser-Lok healing abutments when a Laser-Lok abutment restoration is planned to inhibit epithelial downgrowth, establish a soft tissue seal and protect the bone. When a Laser-Lok component is used and temporarily removed for impression making or other restorative procedures, keep the removed Laser-Lok component in sterile saline until reinserting into the site. abutment height Laser-Lok Hand-tighten with the .050” (1.25mm) Hex Driver. Titanium Alloy. The 3.5mm, 4.5mm and 5.7mm healing abutments are laser marked for easy intraoral identification of the prosthetic platform, emergence and height: abutment height Y = Yellow (3.5mm) platform G = Green (4.5mm) platform B = Blue (5.7mm) platform N, R or W = Narrow, Regular or Wide emergence 3 or 5 = 3mm or 5mm abutment height L = Laser-Lok 3.0 healing abutments are not laser marked due to their small size. L02015-003 Handling of Laser-Lok abutments module Y = Yellow (3.5mm) platform G = Green (4.5mm) platform B = Blue (5.7mm) platform N, R or W = Narrow, Regular or Wide emergence 1, 2, 3 or 5 = 1mm, 2mm, 3mm or 5mm abutment height 3.0 healing abutments are not laser marked due to their small size. Healing Abutments Laser-Lok Healing Abutments Standard Healing Abutments 3mm height 5mm height platform abutment diameter Narrow PYNHA3L PYNHA5L 3.5mm, Laser-Lok 4.0mm PGNHA3L PGNHA5L 4.5mm, Laser-Lok 5.0mm PBNHA3L PBNHA5L 5.7mm, Laser-Lok 6.0mm Regular TP3HA3L TP3HA5L 3.0m, Laser-Lok 3.5mm PYRHA3L PYRHA5L 3.5mm, Laser-Lok 4.5mm PGRHA3L PGRHA5L 4.5mm, Laser-Lok 5.5mm PBRHA3L PBRHA5L 5.7mm, Laser-Lok 6.5mm Wide TP3WHA3L TP3WHA5L 3.0mm, Laser-Lok 4.0mm PYWHA3L PYWHA5L 3.5mm, Laser-Lok 6.0mm PGWHA3L PGWHA5L 4.5mm, Laser-Lok 7.0mm 1mm height 2mm height 3mm height 5mm height platform abutment diameter Narrow - TP3NHA2 TP3NHA3 TP3NHA5 3.0mm 3.0mm PYNHA1 PYNHA2 PYNHA3 PYNHA5 3.5mm 4.0mm PGNHA1 PGNHA2 PGNHA3 PGNHA5 4.5mm 5.0mm PBNHA1 PBNHA2 PBNHA3 PBNHA5 5.7mm 6.0mm Regular - TP3HA2 TP3HA3 TP3HA5 3.0mm 3.5mm - PYRHA2 PYRHA3 PYRHA5 3.5mm 4.5mm - PGRHA2 PGRHA3 PGRHA5 4.5mm 5.5mm - PBRHA2 PBRHA3 PBRHA5 5.7mm 6.5mm Wide - - TP3WHA3 TP3WHA5 3.0mm 4.0mm - - TP3EWHA3 TP3EWHA5 3.0mm (extra wide) 5.0mm - - PYWHA3 PYWHA5 3.5mm 6.0mm - - PGWHA3 PGWHA5 4.5mm 7.0mm - - PBWHA3 PBWHA5 5.7mm 8.0mm Hand-tighten with the .050” (1.25mm) Hex Driver. Titanium Alloy. The 3.5mm, 4.5mm and 5.7mm healing abutments are laser marked for easy intraoral identification of the prosthetic platform, emergence and height:
6 shop online at store.biohorizons.com Use hexed for single-unit, screw retained, long term temporary restorations that require superior esthetics. Use non-hexed for multiple-unit, screw retained, long term temporary restorations. When a Laser-Lok component is used and temporarily removed for impression making or other restorative procedures, keep the removed Laser-Lok component in sterile saline until reinserting into the site. Packaged with an abutment screw (PXAS). Titanium Alloy for strength. TiN coated for esthetics. Final torque: 30Ncm. Use for fabrication of cement-retained provisional restorations (up to 30 days). Packaged in packs of three. PEEK (PolyEtherEtherKetone) material. 9.5mm 3.0 platform 3.0 platform all other platforms all other platforms 1.5mm 2mm 9.5mm 9.5mm L02015-037 Screw-retained crown using the Laser-Lok Easy Ti abutment module L02015-039 Cement-retained crown using the Laser-Lok Easy Ti abutment and PEEK plastic sleeves module Temporary Abutments Laser-Lok Easy Ti Abutments TP3ETPS Pick-up Sleeve, 3.0mm (pack of 3) PXETPS Pick-up Sleeve (pack of 3) Use hexed for single-unit, screw-retained, long term temporary restorations (>30 days). Use non-hexed for multiple-unit, screwretained, long term temporary restorations (>30 days). Packaged with an abutment screw (PXAS).Titanium Alloy. Final torque: 30Ncm. 12mm 1.5mm 3.0 platform all other platforms 0.5mm L02015-022 Screw-retained bridge using titanium temporary abutments module TitaniumTemporary Abutments hexed non-hexed platform TP3ETHL TP3ETNL 3.0mm PYETHL PYETNL 3.5mm PGETHL PGETNL 4.5mm PBETHL PBETNL 5.7mm hexed non-hexed platform TP3TTH TP3TTN 3.0mm PYTTH PYTTN 3.5mm PGTTH PGTTN 4.5mm PBTTH PBTTN 5.7mm Easy Ti Abutment Sleeves
7 shop online at store.biohorizons.com Use for fabrication of cement- or screw-retained provisional restorations (up to 30 days). A direct coping screw (PXDCS, purchased separately) may be used to maintain screw access hole during fabrication of screw-retained provisional prostheses. Packaged with an abutment screw (PXAS). PEEK (PolyEtherEtherKetone) material. Final torque: 30Ncm. 3mm 5mm Use for fabrication of cement-retained provisional restorations (up to 30 days). Packaged with an abutment screw (PXAS). PEEK (PolyEtherEtherKetone) material. Final torque: 30Ncm. 20° 10mm 3mm L02015-017 Cement-retained crown using the PEEK temporary abutment module L02015-018 Screw-retained crown using the PEEK temporary abutment module Use for fabrication of cement- or screw-retained provisional restorations (up to 30 days). A direct coping screw (PXDCS, purchased separately) may be used to maintain screw access hole during fabrication of screwretained provisional prostheses. Packaged with an abutment screw (PXAS). PEEK (PolyEtherEtherKetone) material. Final torque: 30Ncm. 3.0 platform all other platforms Temporary Abutments PEEK Temporary Abutments (Regular Emergence) Angled PEEK Temporary Abutments (Regular Emergence) PEEK Temporary Cylinder Abutments L02015-042 Screw-retained crown using the PEEK temporary cylinder abutment module L02015-043 Custom healing abutment using the iShell and Peek temporary abutment module hexed non-hexed platform TP3PTC TP3PTCN 3.0mm PYPTC PYPTCN 3.5mm PGPTC PGPTCN 4.5mm PBPTC PBPTCN 5.7mm platform TP3TA 3.0mm PYRTA 3.5mm PGRTA 4.5mm PBRTA 5.7mm platform TP3RATA 3.0mm PYRATA 3.5mm PGRATA 4.5mm
8 shop online at store.biohorizons.com 11mm 5mm 16mm Use to make an open-tray, implant-level impression. Packaged with the direct coping screw, shallow hex (PXDCSS). Non-hexed versions may also be used to fabricate multiple-unit bars. Titanium Alloy. Hand-tighten. Note: TP3DCL is packaged with the direct coping screw, long (PXDCSL). TP3DCL all other platforms Use to make a closed-tray, implant-level, hexed-timed impression. Pre-assembled with a coping screw (PXSS). Titanium Alloy. 13mm 2mm 11mm 3.0 platform all other platforms 16mm 5mm 21mm L02015-007 Closed tray technique using the indirect transfer coping module L02015-008 Fabricating a custom impression coping using the closed tray technique module L02015-005 Open tray technique using the direct pick-up coping module L02015-006 Fabricating a custom impression coping using the open tray technique module Impression Components Indirect Scoop Copings (Closed Tray) Direct Pick-up Copings (Open Tray) platform Narrow PYNISC 3.5mm PGNISC 4.5mm PBNISC 5.7mm Regular TP3ISC 3.0mm PYRISC 3.5mm PGRISC 4.5mm PBRISC 5.7mm Wide TP3WISC 3.0mm PYWISC 3.5mm PGWISC 4.5mm hexed non-hexed platform Narrow PYNDC PYNDCN 3.5mm PGNDC PGNDCN 4.5mm PBNDC PBNDCN 5.7mm Regular TP3DC TP3DCN 3.0mm TP3DCL 3.0mm, long PYRDC - 3.5mm PGRDC - 4.5mm PBRDC - 5.7mm Wide PYWDC - 3.5mm PGWDC - 4.5mm Use in the lab to represent the implant in the working cast or printed model. Not intended for use with tissuelevel implants. Titanium Alloy. Implant Analogs platform TP3IA 3.0mm PYIA 3.5mm PGIA 4.5mm PBIA 5.7mm platform TP3IA25 3.0mm (pack of 25) PYIA25 3.5mm (pack of 25) PGIA25 4.5mm (pack of 25) PBIA25 5.7mm (pack of 25)
9 shop online at store.biohorizons.com 7mm PXDCS& PXDCSL PXDCSS Use with the 3inOne Abutment to form an impression coping for closed-tray, hexed-timed transfers. Hand-tighten. Titanium Alloy. Impression Components Direct Coping Screws Packaged with all Direct Pick-up Copings, except 3.0mm platform, hexed, long (TP3DCL). Short hex depth for easy removal of impression material. May also be used to maintain the screw access hole during fabrication of a screw-retained provisional prostheses. Utilizes the .050” (1.25mm) Hex Driver. Handtighten or torque to 30 Ncm depending on application. Titanium Alloy. PXDCSS Direct Coping Screw, Shallow Hex Includes a deeper hex that allows up to 7mm to be prepped without losing the hex engagement. May also be used in place of an abutment screw (PXAS) when extra length is needed, or to maintain the screw access hole during fabrication of a screw-retained provisional prostheses. Utilizes the .050” (1.25mm) Hex Driver. Hand-tighten or torque to 30 Ncm depending on application. Titanium Alloy. PXDCS Direct Coping Screw Packaged with 3.0mm platform, hexed, long (TP3DCL). PXDCSL has the same deep hex as the PXDCS and is 5mm longer than the PXDCS and the PXDCSS. May also be used in place of an abutment screw (PXAS) when extra length is needed, or to maintain the screw access hole during fabrication of a screw-retained provisional prostheses. Utilizes the .050” (1.25mm) Hex Driver. Hand-tighten or torque to 30 Ncm depending on application. Titanium Alloy. PXDCSL Direct Coping Screw, Long PXBT Ball-top Screw for Indirect Transfer Ball-top Screw for Indirect (Closed Tray) Transfer Use for traditional impressions or intra-oral scanning. PEEK (PolyEtherEtherKetone) and Titanium Alloy material. Note: Prior to scanning, verify that the scan abutment is available in the library of the design software that will be used to design the abutment. Design libraries can be downloaded from www.vulcandental.com. L02015-038 Custom (CAD/CAM) prosthetics overview module L02015-044 Snap Scan Bodies Technique module 8mm height 11mm height platform TP3SSB8 TP3SSB11 3.0mm PYSSB8 PYSSB11 3.5mm PGSSB8 PGSSB11 4.5mm PBSSB8 PBSSB11 5.7mm Snap Scan Body Fits all implant prosthetic platforms. Low profile screw head. Packaged with all two-piece abutments, except Hybrid and Angled Multiunit abutments that are packaged with the PXMUAS. Utilizes the .050” (1.25mm) Hex Driver. Titanium Alloy. Final torque: 30 Ncm. PXAS Abutment Screw Abutment Screw PXAS25 Abutment Screw (pack of 25)
10 shop online at store.biohorizons.com Use for table top or intra-oral scanning. May also be used for fabrication of cement- or screw-retained provisional restorations (up to 30 days). Packaged with an abutment screw (PXAS). PEEK (PolyEtherEtherKetone) material. Final torque: 30Ncm. Note: Prior to scanning, verify that the scan abutment is available in the library of the design software that will be used to design the abutment. Design libraries can be downloaded from www.vulcandental.com. 8mm L02015-038 Custom (CAD/CAM) prosthetics overview module Custom & CAD/CAM Abutments PEEK Scan Abutments platform TP3PSA 3.0mm PYPSA 3.5mm PGPSA 4.5mm PBPSA 5.7mm Custom Zirconia & Titanium Abutments for BioHorizons Implant Systems • Titanium & hybrid zirconia abutments • Surgical guides • Titanium Bars • Full arch Zirconia • Complete digital workflow solutions WWW . VU L C AND EN T A L . COM • 8 4 4 . 4 8 4 . 2 3 0 1
11 shop online at store.biohorizons.com Use for anterior cases that require a durable, highly esthetic solution. For single-unit, screw-retained or cement-retained, CAD/ CAM hybrid zirconia restorations. When a Laser-Lok component is used and temporarily removed, keep the component in sterile saline until reinserting into the site. Packaged with an abutment screw (PXAS). Titanium Alloy for strength. TiN coated for esthetics. Final torque: 30Ncm. Note: TP3TBL and TP3TB have 3.0mm platform connections, but the margins flare to 3.5mm. Use hexed abutments for single-unit, screw-retained or cement-retained, CAD/ CAM hybrid zirconia restorations. Use non-hexed abutments for multiple unit, screw-retained CAD/CAM hybrid zirconia restorations. Abutments have an internal thread to capture the abutment screw. Packaged with an abutment screw (PXMUAS). Titanium Alloy for strength. Final torque: 30Ncm. final version provided by the lab Hybrid Base Abutments packaged with PXMUAS (light blue) abutment screw. 4mm 1.5mm 0.5mm 1mm 5mm Laser-Lok 1mm 5mm Laser-Lok Use as a foundation to create a full contour wax-up for a lithium disilicate glass-ceramic pressed crown. Packaged in packs of three. Acetal resin (Delrin® or Pomalux®) sleeve. 4mm 1.5mm 2mm Use as a foundation to create a full contour wax-up for a lithium disilicate glass-ceramic pressed crown. Packaged in packs of three. Acetal resin (Delrin® or Pomalux®) sleeve. 8mm L02015-046 Laser-Lok Titanium Base Abutment 14.5mm PXMUASL PHYBWSS PHYBWSL Custom & CAD/CAM Abutments Hybrid Base Abutments Hybrid Abutment Waxing Sleeves & Block-out Screw PHYBWSS Waxing Sleeve, Small (pack of 3) PHYBWSL Waxing Sleeve, Large (pack of 3) Laser-Lok Titanium Base Abutments PXMUASL Custom Block-out Screw Laser-Lok Titanium Base Waxing Sleeves PYTBWSI 3.0/3.5mm Waxing Sleeve, indexed (pack of 3) PGTBWSI 4.5mm Waxing Sleeve, indexed (pack of 3) PBTBWSI 5.7mm Waxing Sleeve, indexed (pack of 3) Notes L02015-047 Hybrid Base Abutment Restorations hexed non-hexed 2mm collar platform TP3HYB TP3HYBN TP3HYB2 3.0mm PYHYB PYHYBN PYHYB2 3.5mm PGHYB PGHYBN PGHYB2 4.5mm PBHYB PBHYBN PBHYB2 5.7mm platform TP3TBL 3.0mm, Laser-Lok PYTBL 3.5mm, Laser-Lok PGTBL 4.5mm, Laser-Lok PBTBL 5.7mm, Laser-Lok
12 shop online at store.biohorizons.com Use with PXPAS for angled screw access from 0° to 15°. PXPAS Precision Angled Screw For use with the Hybrid Base Abutment and Precision Angled Driver. Titanium Alloy. Final torque: 30 Ncm. Note: Precision angled screw and driver are only compatible with the hybrid base abutments in a digital work flow. Not compatible with Laser-Lok titanium base or 2mm tall hybrid base abutments. The Precision Angled Driver and Screw can be used with the Hybrid Base abutment (hexed and non-hexed) to position the screw channel at an angle up to 15°. Digital planning is available for 3Shape and Exocad design software. Download the digital library from www.vulcandental.com. 15° Custom & CAD/CAM Abutments Precision Angled Drivers PADM14 Precision Angled Driver, Manual, Long PADH14 Precision Angled Driver, Handpiece, Long PADS14 Precision Angled Driver, 4mm Square, Long PADS19 Precision Angled Driver, 4mm Square, Extra Long Precision Angled Screw L02015-045 Precision angled screw & driver technique module
13 shop online at store.biohorizons.com Use hexed abutments for single-unit, screw-retained or cement-retained, custom abutment restorations. Use non-hexed abutments for multiple-unit, screw-retained restorations. Packaged with an abutment screw (PXAS). Gold Alloy base with acetal resin (Delrin® or Pomalux®) sleeve. Color-coded by platform. Final torque: 30Ncm. 10mm 10.6mm 3.0 platform all other platforms Use as a foundation to create a full contour wax-up for a lithium disilicate glass-ceramic pressed crown. Packaged in packs of three. Acetal resin (Delrin® or Pomalux®) sleeve. 9.5mm 3.0 platform all other platforms Use hexed abutments for single-unit, screw-retained or cement-retained, custom abutment restorations. Use non-hexed abutments for multiple unit, screw-retained restorations. When a Laser-Lok component is used and temporarily removed for impression making or other restorative procedures, keep the removed Laser-Lok component in sterile saline until reinserting into the site. Packaged with an abutment screw (PXAS). Titanium Alloy for strength. TiN coated for esthetics. Final torque: 30Ncm. 3.0 platform all other platforms 1.5mm 2mm 9.5mm 9.5mm L02015-026 Screw-retained single crowns using custom-cast abutments module L02015-027 Screw-retained bridge using custom-cast abutments module L02015-037 Screw-retained crown using the Laser-Lok Easy Ti abutment module Now includes polishing protection analog Custom & CAD/CAM Abutments Laser-Lok Easy Ti Abutments Custom Castable (UCLA) Abutments TP3ETS Abutment Sleeve, 3.0mm, (pack of 3) PXETS Abutment Sleeve (pack of 3) hexed non-hexed platform TP3ETHL TP3ETNL 3.0mm PYETHL PYETNL 3.5mm PGETHL PGETNL 4.5mm PBETHL PBETNL 5.7mm Easy Ti Abutment Sleeves hexed non-hexed platform TP3CAH TP3CAN 3.0mm PYCAH PYCAN 3.5mm PGCAH PGCAN 4.5mm PBCAH PBCAN 5.7mm platform TP3SUPP 3.0mm PYSUPP 3.5mm PGSUPP 4.5mm PBSUPP 5.7mm Single-use Polishing Protector Use to protect the abutment connection during preparation of the abutment. Abutment is secured using the standard abutment screw (PXAS).
14 shop online at store.biohorizons.com Straight Multi-unit abutments may be used for multiple-unit restorations including: screwretained restorations at the abutment level, cast alloy bars for overdentures and fixed/ detachable (hybrid) restorations. Comes with a cover cap (PXMUCC). Final torque: 30 Ncm using a Multi-unit Hex Adapter. Titanium alloy. 17° Angled Multi-unit abutments may be used to angle-correct divergent implants. Use for multiple-unit restorations including: screw-retained restorations at the abutment level, cast alloy bars for overdentures and fixed/detachable (hybrid) restorations. Comes with a cover cap (PXMUCC) and abutment screw (PXMUAS). Final torque: 30 Ncm. Titanium alloy. Conveniently deliver abutment one-handed using an .050 hex or Unigrip™ driver or twohanded using an angled Multi-unit carrier (MUCA). 2mm 17° 30° 30° Angled Multi-unit abutments may be used to angle-correct divergent implants. Use for multiple-unit restorations including: screw-retained restorations at the abutment level, cast alloy bars for overdentures and fixed/detachable (hybrid) restorations. Comes with a cover cap (PXMUCC) and abutment screw (PXMUAS). Final torque: 30 Ncm. Titanium alloy. Conveniently deliver abutment one-handed using an .050 hex or Unigrip™ driver or twohanded using an angled Multi-unit carrier (MUCA). 2.2mm 2.25mm 4mm 4.5mm 4.5mm 4.5mm 17° 3mm 4.5mm 30° 3mm 4.5mm 1mm 2.2mm 4.5mm L02015-028 Multi-unit abutment hybrid or fixed-detachable-screw-retained restoration module L02015-029 Multi-unit abutment bar overdenture - screw-retained restoration module L02015-031 Correcting a non-passive framework module Multi-unit Abutments Straight Multi-unit Abutments 17° Angled Multi-unit Abutments 30° Angled Multi-unit Abutments 1.88mm 0.84mm 1.80mm 1.12mm 1mm collar 2mm collar 3mm collar 4mm collar 5mm collar platform TP3MU1 TP3MU2 TP3MU3 - - 3.0mm PYMU1 PYMU2 PYMU3 PYMU4 PYMU5 3.5mm PGMU1 PGMU2 PGMU3 PGMU4 PGMU5 4.5mm PBMU1 PBMU2 PBMU3 - - 5.7mm 2.25mm collar 3mm collar 4mm collar platform TP3MU172 TP3MU173 - 3.0mm PYMU172 PYMU173 PYMU174 3.5mm PGMU172 PGMU173 PGMU174 4.5mm PBMU172 PBMU173 - 5.7mm 3mm collar 4mm collar 5mm collar platform TP3MU303 TP3MU304 - 3.0mm PYMU303 PYMU304 PYMU305 3.5mm PGMU303 PGMU304 PGMU305 4.5mm PBMU303 PBMU304 - 5.7mm
15 shop online at store.biohorizons.com Use for fabricating acrylic temporary and final prostheses. May be trimmed for height. Packaged with prosthetic screw (PXMUPSR). Titanium alloy. Use for fabricating metal-reinforced acrylic prostheses or bar overdentures. May be trimmed for height. Packaged with prosthetic screw (PXMUPSR). Acetal resin (Delrin® or Pomalux®) Use for fabricating metal-reinforced acrylic prostheses or bar overdentures, cemented using the passive-fit technique. May be trimmed for height. Packaged with regular and long prosthetic screws (PXMUPSR, PXMUPSL). Coping has a titanium alloy base with acetal resin (Delrin® or Pomalux®) sleeve. Use for fabricating metal-reinforced acrylic prostheses or bar overdentures. May be trimmed for height. Packaged with prosthetic screw (PXMUPSR). Coping has a gold alloy base with acetal resin (Delrin® or Pomalux®) sleeve. 12mm 4.5mm to top of screw 12mm 4.5mm to top of screw 12mm 4.5mm to top of screw 12mm 4.5mm to top of screw Titanium Plastic Custom Castable Gold Custom Castable Passive Fit Laser-Lok Straight Multi-unit abutments may be used for multiple-unit restorations including: screw-retained restorations at the abutment level, cast alloy bars for overdentures and fixed/detachable (hybrid) restorations. When a Laser-Lok component is used and temporarily removed, keep the removed Laser-Lok component in sterile saline until reinserting into the site. Comes with a cover cap (PXMUCC). Final torque: 30 Ncm using a Multi-unit Hex Adapter. Titanium alloy. 3mm 2.2mm 4.5mm 2mm 2.2mm 4.5mm L02015-003 Handling of Laser-Lok abutments module Multi-unit Abutments & Components Laser-Lok Straight Multi-unit Abutments Multi-unit Copings PXMUTC PXMUGC PXMUPC PXMUPFC 2mm collar 3mm collar 4mm collar platform TP3MU2L TP3MU3L - 3.0mm PYMU2L PYMU3L PYMU4L 3.5mm PGMU2L PGMU3L PGMU4L 4.5mm
16 shop online at store.biohorizons.com Locator attachments for multi-unit abutments have been designed as a free-standing option (LMUTC) for the angled multi-unit posterior sites and for castable bar-splinted applications (LMUDC). The Locator Multi-unit Bar Processing Package includes Denture Cap with Yellow Bar Processing Male, Dual Retentive Replacement Males: Clear, Pink, Blue, and Block-Out Spacer. Offered in 2 packs and 10 packs. For complete instructions, visit the Zest Anchors web site. Use Male Processing Package for these collars (LMPP-2 or LMPP-10). Use Locator Multi-unit Bar Processing Package listed below for these collars. 3mm 4.3mm Abutment w/ Ti Collar Abutment w/ Delrin® Collar Use to make a direct pick-up impression (open-tray) at the abutment level. Titanium alloy. Hand tighten. Use to make an indirect transfer (closed-tray) impression at the abutment level. Titanium alloy. Hand tighten. 16mm 9mm Direct Pick-up 8mm Indirect Transfer L02015-010 Multi-unit abutment impression technique - direct open tray module L02015-011 Multi-unit abutment impression technique - closed tray module L02015-030 Verification jig fabrication module Multi-unit Components Multi-unit Locators® LMUTC-2 Locator Multi-unit Abutment w/ Ti Collar (2 pack) LMUTC-10 Locator Multi-unit Abutment w/ Ti Collar (10 pack) LMUDC-2 Locator Multi-unit Abutment w/ Delrin® Collar (2 pack) LMUDC-10 Locator Multi-unit Abutment w/ Delrin® Collar (10 pack) LMUBPP-2 Locator Multi-unit Bar Processing Package (2 pack) LMUBPP-10 Locator Multi-unit Bar Processing Package (10 pack) Multi-unit Impression Copings PXMUDPC Direct Pick-up Coping, Multi-unit PXMUIC Indirect Transfer Coping, Multi-unit Multi-unit Scan Bodies Use to scan and make a digital model of multi-unit analogs at the abutment level. Titanium alloy and PEEK. Hand tighten using C13485. IO 11B-A Elos Accurate Multi-unit Scan Body C13485 Elos Accurate Scan Body Driver L02015-048 Elos MU Scan body technique module
17 shop online at store.biohorizons.com Use at lab to represent the Multi-unit/Implant assembly in the working cast or printed model. Not for use with implant-level impressions. Titanium alloy. Use to protect abutment-coping interface when polishing the metal framework. Titanium alloy. PXMUCC is packaged with all Multi-unit abutments. Hand-tighten with .050” (1.25mm) Hex Driver or Unigrip™ screw driver. Titanium alloy and PEEK. 24mm For angled Multi-unit abutments only. Final torque: 30 Ncm with .050” (1.25mm) Hex Driver or Unigrip™ screw driver. Titanium alloy. Included with abutment but can also be ordered separately. Use to deliver angled Multi-unit abutments to the surgical site. Titanium alloy and PEEK. For attaching copings to the Multi-unit abutments. Hand-tighten or torque to 15 Ncm with .050” (1.25mm) Hex Driver or Unigrip™ screw driver, depending on application. Titanium alloy. Included with copings where indicated but can also be ordered separately. 15mm 2.5mm 1.5mm PXMUPSR PXMUPSL PXMUPSS Multi-unit Components Multi-unit Coping Screws PXMUPSR Prosthetic Screw, Multi-unit, Regular (pack of 5) PXMUPSR25 Prosthetic Screw, Multi-unit, Regular (pack of 25) PXMUPSL Prosthetic Screw, Multi-unit, Long (pack of 5) PXMUPSS Prosthetic Screw, Multi-unit, Small (pack of 5) PXMUPSS1 Prosthetic Screw, Multi-unit, Small Multi-unit Angled Abutment Screw &Abutment Carrier PXMUAS Abutment Screw, Multi-unit PXMUAS25 Abutment Screw, Multi-unit (pack of 25) Multi-unit Cover Caps MUCA Angled Multi-unit Abutment Carrier (pack of 3) BCMUCA† Angled Multi-unit Abutment Carrier, Flexible (pack of 2) PXMUCC Cover Cap, Multi-unit PXMUCCC Contoured Cover Cap, Multi-unit (pack of 2) Multi-unit Abutment Replicas & Protective Analog PXMUAR Abutment Replica, Multi-unit PXMUAR25 Abutment Replica, Multi-unit (pack of 25) PXMUPA Protection Analog, Multi-unit (pack of 5) † Available Q3 2021.
18 shop online at store.biohorizons.com Manual Handpiece 4mm Square Use to hand tighten straight Multi-unit abutments. Use to torque straight Multi-unit abutments. Driven by latch-type handpiece. Do not exceed 30 Ncm. Use to torque straight Multi-unit abutments. Driven by 4mm square drive handwrench, ratchet, or torque wrench. Do not exceed 30 Ncm. Use parallel pins to assess implant angulation and estimate which angled abutment is appropriate for the restoration. Each Try-in is laser marked from 1mm to 5mm to correspond with the Straight Multi-unit Abutment collar heights and can also be used as a measuring tool for OD Secure, Locator, Locator R-Tx and Ball abutment systems. Try-in is carried to the site by the handle and snaps into the implant. Each Try-in is laser marked to correspond with the Angled Multi-unit Abutment collar heights. Try-in is carried to the site by the handle and snaps into the implant. Multi-unit Try-in Abutments may be used to measure tissue thickness and verify proper prosthetic seating prior to final abutment seating. 5mm 4mm 3mm 2mm 1mm Straight abutment Laser marking 17°Angled Abutment Laser marking 30°Angled Abutment Laser marking 4mm 3mm 2.25mm 5mm 4mm 3mm Multi-unit Components Multi-unit Try-in Abutments Multi-unit Hex Adapters for Straight Abutments PXMUHAM Manual Multi-unit Hex Adapter PXMUHAH Handpiece Multi-unit Hex Adapter PXMUHAR 4mm Square Multi-unit Hex Adapter Paralleling Pins 144-100 Straight Parallel Pins 144-200 20º Angled Parallel Pin 144-230 30º Angled Parallel Pin 17° Angled 30° Angled platform TRYTP3MU17 TRYTP3MU30 3.0mm TRYPYMU17 TRYPYMU30 3.5mm TRYPGMU17 TRYPGMU30 4.5mm TRYPBMU17 TRYPBMU30 5.7mm straight platform TRYTP3MU 3.0mm TRYPYMU 3.5mm TRYPGMU 4.5mm TRYPBMU 5.7mm
19 shop online at store.biohorizons.com 5mm 10mm 9mm 3mm 3mm 3.0 platform all other platforms 5mm Laser-Lok Use to fabricate cement-retained, single- or multiple-unit prostheses when a deep gingival sulcus is present. When a Laser-Lok component is used and temporarily removed, keep the component in sterile saline until reinserting into the site. Packaged with an abutment screw (PXAS). Titanium Alloy. TiN coated for esthetics. Final torque: 30Ncm. Use to create a cement-retained, single- or multiple-unit prostheses. When a Laser-Lok component is used and temporarily removed, keep the component in sterile saline until reinserting into the site. Packaged with an abutment screw (PXAS). Titanium Alloy. TiN coated for esthetics. Final torque: 30Ncm. 1mm 3mm 2mm 9mm 8mm 15° 3.0 platform all other platforms 1mm 15° Laser-Lok 3mm 2mm 9mm 1mm 8mm 3.0 platform all other platforms 1mm Laser-Lok Use to fabricate cement-retained, single- or multiple-unit prostheses. When a Laser-Lok component is used and temporarily removed, keep the component in sterile saline until reinserting into the site. Packaged with an abutment screw (PXAS). Titanium Alloy. TiN coated for esthetics. Final torque: 30Ncm. L02015-023 Cement-retained single crowns using cementable abutments module L02015-025 Chairside modification of cement-retained abutments module L02015-023 Cement-retained single crowns using cementable abutments module L02015-025 Chairside modification of cement-retained abutments module Esthetic & Cementable Abutments Angled Esthetic Abutments Straight Esthetic Abutments Straight Esthetic Abutments (3mm buccal height) Laser-Lok standard platform TP3AEAL TP3AEA 3.0mm PYAEAL PYAEA 3.5mm PGAEAL PGAEA 4.5mm PBAEAL PBAEA 5.7mm Laser-Lok standard platform TP3SEAL TP3SEA 3.0mm PYSEAL PYSEA 3.5mm PGSEAL PGSEA 4.5mm PBSEAL PBSEA 5.7mm Laser-Lok standard platform TP3SEA3L TP3SEA3 3.0mm TP3WSEA3L (wide) TP3WSEA3 (wide) 3.5mm PYSEA3L PYSEA3 3.5mm PGSEA3L PGSEA3 4.5mm PBSEA3L PBSEA3 5.7mm
20 shop online at store.biohorizons.com For screw-retained restorations, maintain at least 3mm from the abutment platform to avoid damaging the abutment screw. For cement-retained restorations, maintain at least 4mm of chimney height from the margin for optimal cement retention. 4.5mm 10mm 8mm Use to fabricate cement-retained, single- or multiple-unit prostheses. Packaged with an abutment screw (PXAS). Titanium Alloy. Final torque: 30Ncm. 3.0 platform all other platforms Use to fabricate cement-retained, single- or multiple-unit prostheses. Packaged with an abutment screw (PXAS). Titanium Alloy. TiN coated for esthetics. Final torque: 30Ncm. 20° 10mm 3mm Use to fabricate cement-retained, single- or multiple-unit prostheses. Also used with a Ball-top Screw for a closed-tray, hex-timed transfer. Packaged with an abutment screw (PXAS). Titanium Alloy. TiN coated for esthetics. Final torque: 30Ncm. 8mm 1.5mm L02015-024 Cement-retained bridge using cementable abutments module Esthetic & Cementable Abutments 3inOne Abutments Angled Abutments Narrow Emergence Abutments PYREA 3.5mm Regular Emergence, 3inOne Abutment PGREA 4.5mm Regular Emergence, 3inOne Abutment PBREA 5.7mm Regular Emergence, 3inOne Abutment PYRAA 3.5mm Regular Emergence, Angled Abutment PGRAA 4.5mm Regular Emergence, Angled Abutment PBRAA 5.7mm Regular Emergence, Angled Abutment TP3SA 3.0mm Straight Abutment PYNEA 3.5mm Narrow Emergence Abutment PGNEA 4.5mm Narrow Emergence Abutment PBNEA 5.7mm Narrow Emergence Abutment Notes
21 shop online at store.biohorizons.com 50° With cuff heights ranging from 0.5mm to 6mm, the OD Secure provides attachment solutions for even the most challenging cases. The housing cap that is included with each OD Secure abutment corrects up to 30° of divergence. The new Xtend housing cap corrects up to 50° of divergence and is compatible with the retention caps included in the OD Secure abutment kit. The OD Secure abutment uses the industry’s lowest profile connection to attach dentures and partial dentures to dental implants. The abutment is designed for easy delivery using an .050” hex driver and is color-coded to ensure that the abutment matches the implant platform every time. .050” hex driver delivered and torqued with an .050” (1.25mm) hex driver wear-resistant coating titanium nitride coating for enhanced durability and strength lowprofile design total height of 2mm with insert and housing cap color-coded color coding to easily identify the proper platform size
22 shop online at store.biohorizons.com The OD Secure comes packaged with the abutment, metal housing, four retentive inserts, a lab processing insert and a protection disk. L02015-040 OD Secure impression technique module L02015-041 OD Secure chairside pick-up using existing denture module 2.5mm 0.5 to 6mm cuff height 4.5mm 2mm OD Secure Abutments & Components OD Secure Abutment System OD Secure Abutment Components Xtend Housing Cap assembled with Lab Processing Insert and is used to correct up to 50° of divergence. ODS-XH Xtend Housing Cap (2pack) New pink Housing Cap comes assembled with Lab Processing Insert. ODS-HCPM Housing Cap (2pack) ODS-XPM Xtend Lab Processing Insert (4pack) ODSRC-P Retention Cap Insert (4pack) Retention: 2.5lbs - Soft ODSRC-V Retention Cap Insert (4pack) Retention: 6lbs - Hard ODSRC-Y Retention Cap Insert (4pack) Retention: 1.5lbs - Extra Soft ODSRC-C Retention Cap Insert (4pack) Retention: 4lbs - Medium ODS-CAK Cap Assortment Kit (2 pack) ODS-PM Lab Processing Insert (4pack) ODS-BS Block-out Spacer (4pack) ODSIC Impression Coping (2pack) ODSCT Cap Insert/Extractor Tool ODSA OD Secure Analog (2pack) ODSCM Castable Male (2pack) 3.0mm platform 3.5mm platform 4.5mm platform 5.7mm platform cuff height TP3ODSK0 PYODSK0 PGODSK0 PBODSK0 0.5mm TP3ODSK1 PYODSK1 PGODSK1 PBODSK1 1mm TP3ODSK2 PYODSK2 PGODSK2 PBODSK2 2mm TP3ODSK3 PYODSK3 PGODSK3 PBODSK3 3mm TP3ODSK4 PYODSK4 PGODSK4 PBODSK4 4mm TP3ODSK5 PYODSK5 PGODSK5 PBODSK5 5mm TP3ODSK6 PYODSK6 PGODSK6 PBODSK6 6mm
23 shop online at store.biohorizons.com Locator Implant Attachments are designed for use with overdentures or partial dentures retained in whole or in part by dental implants in the mandible or maxilla. Order by cuff height to match the height of the gingival tissue. The abutment will extend above the tissue by 1.8mm to allow the Locator Male to seat completely. Order one Locator Male Processing Set for each Locator Abutment (sold in packs of 2 or 10). Can also be used with tissue-level implants. Titanium Alloy. The Male Processing Package provides 3 choices of retention. The Replacement Males (clear, pink and blue) are used to restore implants with up to 10° of divergence (20° between implants). The Extended Range Replacement Males (green and red) accommodate divergences from 10° and 20° (40° between implants), and may be purchased separately. 0 to 6mm cuff height 3.9mm 1.8mm 1.0mm 5.5mm Multi-purpose tool serves as hand driver for seating Locator Abutments onto the implants, seating tool for nylon male inserts and insert removal tool. Note: now packaged with one Locator Abutment Holder Sleeve. Use to retain and deliver the Locator Abutment using the driver portion of the Core Tool. Hand driver For hand tightening the Locator abutment Locator abutment holder For retaining and delivering the Locator abutment using the hand driver portion of the core tool. Male retention insert tool For placing the male retention inserts into the metal housing Male retention insert removal tool For removing the male retention inserts from the metal housing Locator core tool instructions L02015-013 Locator® abutment impression technique module L02015-032 Locator® abutment overdenture: chairside pickup using existing denture Locator Abutments & Components Locator Abutments Locator Components LCT Core Tool LAHS Locator Abutment Holder Sleeve (4 pack) 3.0mm platform 3.5mm platform 4.5mm platform 5.7mm platform cuff height - PYLA0 PGLA0 - 0mm TP3LA1 PYLA1 PGLA1 PBLA1 1mm TP3LA2 PYLA2 PGLA2 PBLA2 2mm TP3LA3 PYLA3 PGLA3 PBLA3 3mm TP3LA4 PYLA4 PGLA4 PBLA4 4mm TP3LA5 PYLA5 PGLA5 PBLA5 5mm TP3LA6 PYLA6 PGLA6 PBLA6 6mm (2.5mm) (3.5mm) (4.5mm) (5.5mm) (6.5mm)
24 shop online at store.biohorizons.com Includes: (2) Denture Caps assembled with Black Processing Males; (2) White Block-out Spacers; (2) Clear, (2) Pink and (2) Blue Nylon Males. Includes: (10) Denture Caps assembled with Black Processing Males; (10) White Block-out Spacers; (10) Clear, (10) Pink and (10) Blue Nylon Males. Includes: (2) Denture Caps assembled with Black Processing Males; (2) White Block-out Spacers; (2) Green, (2) Orange and (2) Red Nylon Males. Includes: (10) Denture Caps assembled with Black Processing Males; (10) White Block-out Spacers; (10) Green, (10) Orange and (10) Red Nylon Males. Locator Components LMPP-2 Male Processing Package (2 pack) LMPP-10 Male Processing Package (10 pack) LMPPER-2 Male Processing Package, Extended Range (2 pack) LMPPER-10 Male Processing Package, Extended Range (10 pack) Retention: 4lbs, 4 pack LRM-G Extended Range Replacement Male (green) Retention: 2lbs, 4 pack LRM-O Extended Range Replacement Male (orange) Retention: 1lb, 4 pack LRM-R Extended Range Retention Replacement Male (red) Retention: 0lb, 4 pack LRM-Z Extended Range Replacement Male (gray) Retention: 5lbs, 4 pack LRM-C Replacement Male (clear) Retention: 3lbs, 4 pack LRM-P Replacement Male (pink) Retention: 1.5lb, 4 pack LRM-B Replacement Male (blue) LBPRM Black Processing Replacement Male Use for 3.0, 3.5 and 4.5 platforms LFA-4MM Female Analog 4mm (4 pack) Use with a torque wrench to seat Locator Abutments. LSDT-15MM Square Drive Tool (15mm length) LFA-5MM Female Analog 5mm (4 pack) Use for 5.7 platform Use with a torque wrench to seat Locator Abutments. LSDT-21MM Square Drive Tool (21mm length) LIC Impression Coping (4 pack) LPP Parallel Post (4 pack) LAMG Angle Measurement Guide
25 shop online at store.biohorizons.com Each Assembly includes: (1) Abutment, (1) Denture Attachment Housing with Black Processing Insert, (4) Nylon Retention Inserts, and (1) Block-out Spacer. Locator R-Tx is a better, simpler and stronger system that relies on the same restorative techniques as the original Locator. Now available with the housing cap, spacer and retentive inserts for a convenient all-in-one package. Locator R-Tx Abutments & Components Locator R-Tx Abutments Locator R-Tx Components LRTX-GY Zero Retention Insert Replacement (4pack) LRTX-B Low Retention Insert Replacement (4pack) LRTX-P Medium Retention Insert Replacement (4pack) LRTX-C High Retention Insert Replacement (4pack) LRTX-BS Block-Out Spacer Replacement (20pack) LRTX-DC Denture Attachment Processing Assembly (4pack) LRTX-TL Locator R-Tx Insertion/Removal Tool LRTX-PM Processing Insert Replacement (4pack) LRTX-PS Processing Spacer Replacement (4pack) LRTX-IC Impression Coping (4pack) LRTX-A3 3.5mm Abutment Analog (4pack) LRTX-A4 4mm Abutment Analog (4pack) LRTX-A5 5mm Abutment Analog (4pack) 3.0mm platform 3.5mm platform 4.5mm platform 5.7mm platform cuff height - PYLRTX0 PGLRTX0 - 0.5mm TP3LRTX1 PYLRTX1 PGLRTX1 PBLRTX1 1mm TP3LRTX2 PYLRTX2 PGLRTX2 PBLRTX2 2mm TP3LRTX3 PYLRTX3 PGLRTX3 PBLRTX3 3mm TP3LRTX4 PYLRTX4 PGLRTX4 PBLRTX4 4mm TP3LRTX5 PYLRTX5 PGLRTX5 PBLRTX5 5mm TP3LRTX6 PYLRTX6 PGLRTX6 PBLRTX6 6mm
26 shop online at store.biohorizons.com 5.9mm 2.5mm 3.5mm 2.6mm 5mm 3.2mm 5.5mm Standard O-ring attachment for processing into denture. Includes: (1) O-ring encapsulator, (2) Processing O-rings and (2) Clinical O-rings. Recommended for relatively parallel implants (5° of divergence or 10° between implants). Sizing comparison of O-ring Attachment and Ball Attachment collar height Ball Abutments & Components Ball Abutments Use for retention of tissue-supported overdentures. Ball Abutments may be used for indirect transfer impressions. Ball Abutment Analogs on facing page are used for producing a working cast. Can also be used with tissuelevel implants. Titanium Alloy. L02015-014 Ball abutment impression technique L02015-033 Ball abutment overdenture: chairside pickup using existing denture O-ring Attachment Set 260-100 O-ring Attachment O-ring Individual Components Female receptacle processed into denture. Titanium. 2 per package. 260-300 O-ring Encapsulator Use for lab processing applications. Buna. 12 per package. 260-220 Processing O-ring Use for clinical applications. Silicone. 12 per package. 260-210 Clinical O-ring 1mm collar 3mm collar 5mm collar platform TP3BA1 TP3BA3 TP3BA5 3.0mm PYBA1 PYBA3 PYBA5 3.5mm PGBA1 PGBA3 PGBA5 4.5mm PBBA1 PBBA3 - 5.7mm
27 shop online at store.biohorizons.com The Ball Attachment system offers several advantages over traditional O-ring attachments: • Greater abutment angulation (14° of divergence or 28° between implants) • 0.4mm of less mesial/distal/buccal/lingual space • Four different levels of retention instead of one Includes: (1) Titanium Housing, (3) Female Nylon Inserts - white (more retention), pink (less retention), black (lab processing) and (1) Protective Disk (BCPD, protects tissue during impression making or denture pick-up) Ball Abutment Components Ball Attachment Set Ball Abutment Components BCAS Ball Attachment Set For Resin pickup or Soldering. 2 per package. BCAHT Attachment Housings - Titanium Lab Processing and Chair-side Denture Pick-up. 2 per package. BCIB Black Nylon Insert Clinical use. 2 per package. Extremely elastic retention. BCIG Green Nylon Insert Use to seat nylon inserts in attachment housings. BCIST Insert Seating Tool Clinical use. 2 per package. Very elastic retention: 500-550g. BCIY Yellow Nylon Insert Clinical use. 2 per package. Elastic retention: 800-950g. BCIP Pink Nylon Insert Use for obtaining parallelism. 0°, 7° and 14° rings. Set of 3. BCDR Directional Rings Clinical use. 2 per package. Slightly elastic retention: 1200-1300g. BCIW White Nylon Insert Use to adjust retention of nylon inserts. BCR Reamer Ball Abutment Analogs TP3BAA 3.0mm Ball Abutment Analog PYGBAA 3.5/4.5mm Ball Abutment Analog PBBAA 5.7mm Ball Abutment Analog Use at lab to represent the Ball Abutment/Implant assembly in the working cast. Only use in conjunction with Ball Abutments. Titanium Alloy.
28 shop online at store.biohorizons.com † Available Q2 2021 ‡ Instrument o-rings & c-rings wear out over time. If an instrument is no longer held securely by its associated driver, order a replacement ring through Customer Care. Prosthetic Instrumentation Prosthetic Kit Includes: • .050 (1.25mm) Manual Hex Driver • .050 (1.25mm) Manual Hex Driver, Long • .050 (1.25mm) Handpiece Hex Driver • .050 (1.25mm) Handpiece Hex Driver, Long • .050 (1.25mm) 4mm Square Hex Driver • .050 (1.25mm) 4mm Square Hex Driver, Long Multi-unit Try-in Abutments, 300-100 and ATW are sold separately. PROS3000 Enhanced Prosthetic Instrumentation Kit Tray without instruments (included with PROS3000) PROS2500 Prosthetic Instrumentation Tray (not shown) Provides improved vision and easy access to prosthetic components in posterior regions of the mouth. Hand Wrench and Drivers are sold separately. 300-100‡ AS123 Hand Unit Torque Wrenches Use on drive end of AS123 Hand Unit. Also fits individual Hex Drivers/Adapters and Bone Taps. 300-400‡ Hand Wrench Includes PEEK C-ring for durable retention in Ratchet. Cannot be used with bone taps. 300-206‡ 4mm Square Drive Extender Adjustable torque wrench designed to attach to all 4mm drivers from BioHorizons. Supplied with a dual direction mechanism that allows for insertion and removal functions. When the desired torque is reached (a choice of 10Ncm to 30Ncm) the torque wrench snaps to avoid over torquing. BIOTORQ BioHorizons Adjustable Torque Wrench Place both implants and abutments with 9 distinct torque settings (15, 20, 25, 30, 35, 40, 45, 50 and 60 Ncm). A simple twist of the handle locks in precision-engineered torque values and guarantees accuracy and repeatability. ATW ITL Precise Adjustable Torque Wrench Lightweight titanium design is easy to use as an adjustable torque wrench or a ratchet. Quickly disassembles for cleaning. No calibration required. C12374 Elos Adjustable Torque Wrench C8521 Elos Replacement Bit, 4mm Square Adapter C8381 Elos Replacement Bit, Handpiece Ergonomic design is the ideal solution for access to screws placed in the posterior. The 7 predetermined torque values (10, 15, 20, 25, 30, 32 and 35 Ncm) make it a tool of extreme precision. AGYR-15500 Torque Control 15500 • Hand Wrench • 4mm Square Drive Extender • 4mm Square Multi-unit Hex Adapter • 12 Try-in Abutment Slots • 8 Optional Instrument Slots • Space for Torque Wrenches & AS123 Hand Unit PROS1500† Prosthetic Tray, Small
29 shop online at store.biohorizons.com Use to comfortably hold abutments for chairside or laboratory preparation. Abutments are secured to the handle with a standard abutment screw (PXAS). Comes in three sizes: 3.0, 3.5/4.5 and 5.7mm. Use PXCT to re-thread internal connection implants (Tapered Internal, Internal, Laser-Lok 3.0, Tapered Tissue Level and Single-stage), and 122-170 to re-thread Abutment for Screw abutments where the internal threads have become damaged. Requires a standard surgical Ratchet (130-000) or Hand Wrench (300-400) as a drive mechanism. † Instrument o-rings & c-rings wear out over time. If an instrument is no longer held securely by its associated driver, order a replacement ring through Customer Care. For installation and removal of cover caps, prosthetic and abutment screws. 11.5mm 6.5mm 13.5mm 8.5mm 6.25mm 12.5mm 4mm Square Manual Handpiece 19mm 6.5mm Use to lightly abrade soft tissue prior to placement of a Laser-Lok abutment, if a Laser-Lok abutment has not been used before. L02015-003 Handling of Laser-Lok abutment Prosthetic Instrumentation .050 (1.25mm) Hex Drivers 135-251 Manual Hex Driver, Short 135-351 Manual Hex Driver 135-451 Manual Hex Driver, Long 134-350 Handpiece Hex Driver 134-450 Handpiece Hex Driver, Long 300-350† 4mm Square Hex Driver 300-351† 4mm Square Hex Driver, Long 300-354† 4mm Square Hex Driver, Extra Long Abutment Prepping Handles TP3AH 3.0mm platform Analog Handle PYGAH 3.5/4.5mm platform Analog Handle PBAH 5.7mm platform Analog Handle Laser-Lok Tissue Groomer TP3TG 3.0mm platform PYTG 3.5mm platform PGTG 4.5mm platform PBTG 5.7mm platform Clean-out Tools PXCT† Implant Clean-out Tap Tool Use to comfortably hold abutments for chairside or laboratory preparation. Abutments are secured to the handle with a standard abutment screw (PXAS). Comes in three sizes: 3.0, 3.5/4.5 and 5.7mm. Laser-Lok Protective Sleeves TP3TBLS 3.0mm platform PYTBLS 3.5mm platform PGTBLS 4.5mm platform PBTBLS 5.7mm platform
www.biohorizonscamlog.comRkJQdWJsaXNoZXIy MTE0MzMw