11 shop online at store.biohorizons.com 17° 2.25mm 3.5mm 30° 3mm 3.5mm 1mm 2.2mm 3.5mm L02015-028 Multi-unit abutment hybrid or fixed-detachable-screw-retained restoration module L02015-029 Multi-unit abutment bar overdenture - screw-retained restoration module L02015-031 Correcting a non-passive framework module L02015-003 Handling of Laser-Lok abutments module 5mm 4mm 3mm 2mm 1mm Straight Laser marking 17°Angled Laser marking 30°Angled Laser marking 5mm 4mm 3mm 4mm 3mm 2.25mm Prosthetics Multi-unit Abutments Straight Multi-unit Abutments Straight Multi-unit abutments may be used for multiple-unit restorations including: screwretained restorations at the abutment level, cast alloy bars for overdentures and fixed/ detachable (hybrid) restorations. Comes with a cover cap (PXMUCC). Final torque: 30 Ncm using a Multi-unit Hex Adapter. Titanium alloy. Part Description 1mm collar 2mm collar 3mm collar 4mm collar 5mm collar 3.5mm platform PYMU1 PYMU2 PYMU3 PYMU4 PYMU5 3.5mm platform, Laser-Lok - PYMU2L PYMU3L PYMU4L - Angled Multi-unit Abutments Angled Multi-unit abutments may be used to angle-correct divergent implants. Use for multiple-unit restorations including: screw-retained restorations at the abutment level, cast alloy bars for overdentures and fixed/detachable (hybrid) restorations. Comes with a cover cap (PXMUCC) and abutment screw (PXMUAS). Final torque: 30 Ncm. Titanium alloy. Conveniently deliver abutment one-handed using an .050 hex or Unigrip™ driver or two-handed using an angled Multi-unit carrier (MUCA). Part Description 2.25mm collar 3mm collar 4mm collar 5mm collar 17° angle, 3.5mm platform PYMU172 PYMU173 PYMU174 PYMU174 30° angle, 3.5mm platform - PYMU303 PYMU304 PYMU305 Multi-unit Try-in Abutments Each Try-in is laser marked to correspond with the Multi-unit Abutment collar heights, and can also be used as a measuring tool for OD Secure, Locator, Locator R-Tx and Ball abutment systems. Try-in is carried to the site by the handle and snaps into the implant. Multi-unit Try-in Abutments may be used to measure tissue thickness and verify proper prosthetic seating prior to final abutment seating. Part Number Part Description TRYPYMU 3.5mm Multi-unit Try-in Straight Abutment TRYPYMU17 3.5mm Multi-unit Try-in 17° Angled Abutment TRYPYMU30 3.5mm Multi-unit Try-in 30° Angled Abutment
RkJQdWJsaXNoZXIy MTE0MzMw