7 shop online at store.biohorizons.com Guided Surgery Instruments Drills Guided surgery drills with definitive depth stops follow the standard Tapered Short drill sequence and come in four different length/diameter combinations. The patient-specific surgical protocol that accompanies the surgical guide will indicate which drills to use. Drill #1 Drill #2 Drill #3 DB Drill Ø 4.6mm TSGG1 TSGG2 TSGG3 TSGGDB Ø 5.8mm TSGB1 TSGB2 TSGB3 TSGBDB Screw-retained implant drivers are used to pickup and seat implants when used with a 4mm square ratchet. The driver is secured to the implant using the captured screw and can be easily released after implant placement. Use the depth stops to seat the implants to the planned depth. Orient the implant hex using the notches as a visual reference. The low profile of the screw-retained drivers minimizes stack height when vertical space is limited. These drivers can be used with a handpiece when using the 4mm Square Driver Converter. Screw-retained Implant Drivers TSGG60 TSG Implant-level Driver, 4.6 x 6.0 TSGG75 TSG Implant-level Driver, 4.6 x 7.5 TSGB60 TSG Implant-level Driver, 5.8 x 6.0 TSGB75 TSG Implant-level Driver, 5.8 x 7.5 top band indicates prosthetic platform bottom band indicates master cylinder Tapered Short Implant Driver Color-coding CGS-4SC 4mm Square Drive Converter Drive converter allows the screw-retained drivers to be used with a handpiece.
RkJQdWJsaXNoZXIy MTE0MzMw