11 shop online at store.biohorizons.com Side-cutting drill used to correct eccentric osteotomy preparations. Use at implant uncovery to remove excess crestal bone for proper abutment seating. Screw the guide into the implant and align the profiling bur for precise bone removal. Match profiler & guide color to prosthetic connection. Extended Shank Drills are 8mm longer than our standard drills. Stops are set to same length as each implant for crestal placement. ANCILLARY INSTRUMENTS TSD202507HD 2.5mm Tapered Depth Drill, 7.5mm Stop TSD202509HD 2.5mm Tapered Depth Drill, 9mm Stop TSD202510HD 2.5mm Tapered Depth Drill, 10.5mm Stop TSD202512HD 2.5mm Tapered Depth Drill, 12mm Stop TSD202515HD 2.5mm Tapered Depth Drill, 15mm Stop TSD4020HD 2.0mm Extended Shank HD Drill TSD4025HD 2.5mm Extended Shank HD Drill TSD4028HD 2.8mm Extended Shank HD Drill TSD4032HD 3.2mm Extended Shank HD Drill TSD4037HD 3.7mm Extended Shank HD Drill TSD4041HD 4.1mm Extended Shank HD Drill TSD4047HD 4.7mm Extended Shank HD Drill TSD4054HD 5.4mm Extended Shank HD Drill TP3DBP 3.0mm Bone Profiling Bur & Guide PYDBP 3.5mm Bone Profiling Bur & Guide PGDBP 4.5mm Bone Profiling Bur & Guide PBDBP 5.7mm Bone Profiling Bur & Guide 122-106 #6 Round Bur 122-110 2.0mm Lindemann Bone Cutter The alignment drill can be used to initiate the osteotomy to a depth of 5mm. The cutting surface of the drill hub prepares the crestal bone for the depth drill. 122-104 Alignment Drill 122-015 1.5mm starter drill The 1.5mm starter drill facilitates precise initiation of osteotomies and features a 10.5mm depth marking.
RkJQdWJsaXNoZXIy MTE0MzMw