16 shop online at store.biohorizons.com TEMPORARY ABUTMENTS Use hexed for single-unit screw retained, long term temporary restorations that require superior esthetics (>30 days). Use non-hexed for multiple-unit, screw retained, long term temporary restorations (>30 days). Packaged with an abutment screw (PXAS). Titanium Alloy for strength. TiN coated for esthetics. Final torque: 30Ncm. Refer to the Prosthetic Technique Manual (L02015) for appropriate handling techniques Use to create a wax-up of abutment for Easy Ti Temp Abutments. Packaged in packs of three. Acetal resin (Delrin® or Pomalux®) sleeve. Use for fabrication of cement- or screw-retained provisional restorations (>30 days). Packaged in packs of three. PEEK (PolyEtherEtherKetone) material. 9.5mm 9.5mm 3.0 platform 3.0 platform 3.0 platform all other platforms all other platforms all other platforms TP3ETHL 3.0mm platform, hexed PYETHL 3.5mm platform, hexed PGETHL 4.5mm platform, hexed PBETHL 5.7mm platform, hexed TP3ETNL 3.0mm platform, non-hexed PYETNL 3.5mm platform, non-hexed PGETNL 4.5mm platform, non-hexed PBETNL 5.7mm platform, non-hexed TP3ETS 3.0mm platform (pack of 3) PXETS 3.5mm, 4.5mm & 5.7mm platform (pack of 3) TP3ETPS 3.0mm platform (pack of 3), PEEK PXETPS 3.5mm, 4.5mm & 5.7mm platform (pack of 3), PEEK Using authentic BioHorizons parts will ensure a precision fit connection between the prosthetic component and implant, avoiding costly component failures that may occur from using third-party prosthetics. Authentic BioHorizons parts are color-coded for easy identification to match the mating implant. advantages: • lifetime warranty on all implants and prosthetics • Spiralock® technology minimizes screw loosening • precise mating geometries reduce prosthetic failures • advanced design creates a better engineered connection • color-coded prosthetic components match implant platforms authentic connection 1.5mm 2mm 9.5mm 9.5mm Use for fabrication of cement- or screw-retained provisional restorations (up to 30 days). A direct coping screw (PXDCS, purchased separately) may be used to maintain screw access hole during fabrication of screw-retained provisional prostheses. Packaged with an abutment screw (PXAS). PEEK (PolyEtherEtherKetone) material. Final torque: 30Ncm. hexed non-hexed 3.0mm platform TP3PTC TP3PTCN 3.5mm platform PYPTC PYPTCN 4.5mm platform PGPTC PGPTCN 5.7mm platform PBPTC PBPTCN 3.0 platform all other platforms
RkJQdWJsaXNoZXIy MTE0MzMw