23 shop online at store.biohorizons.com OSTEOTOMY MODIFICATION 12mm implant with Laser-Lok HD Depth gauge HD drill 15mm implant 18mm implant 12mm implant 10.5mm implant 9mm implant 7.5mm implant Purpose: Evaluate osteotomy position and angle. • Provided straight or with a 20° angle • Use after 2.0mm Starter Drill and 2.5mm Depth Drill • 9mm shank for radiographic evaluation of proximity to adjacent anatomy • Hub diameter is 4.0mm Purpose: Incrementally widen the osteotomy to reduce heat generation. • Depth-marked for reference • Efficient cutting drill design collects bone for autografting • The drill tip has limited end cutting. However, the osteotomy depth can be increased with these drills as needed • Matte finish for increased visibility under operatory lights • Color-coded by implant body diameter (gray=3.0mm, purple=3.4mm, yellow=3.8mm, green=4.6mm and blue=5.8mm) •1,000 RPM Purpose: To visualize final osteotomy diameter and location. • Depth-marked for reference • Use following the final width increasing drill for each implant • Place the depth gauge into the osteotomy site, adjust osteotomy depth as necessary • Can also be used after 2mm drill by inverting • Color-coded by implant body diameter (gray=3.0mm, purple=3.4mm, yellow=3.8mm, green=4.6mm and blue=5.8mm)
RkJQdWJsaXNoZXIy MTE0MzMw