CONELOG® ODSecure® System – Getting attached is simple
CONELOG ODSecure System For reliable fixation of dentures on implants The CONELOG ODSecure abutment uses one of the industry´s lowest profile connection to attach dentures and partial dentures to dental implants. With gingiva heights ranging from 1.0 to 6.0 mm, the CONELOG ODSecure provides attachment solutions for even the challenging cases. The abutment is designed for easy handling using an 1.25 mm screwdriver, hex, and is color-coded to ensure that the abutment matches the implant platform every time. Low profile design Total height of 2.0 mm with insert and housing cap Color-coded Color coding to easily identify the proper platform size Wear-resistant coating Titanium nitride coating for enhanced durability and strength Screwdriver, hex Delivered and torqued with a screwdriver, hex The housing cap corrects up to 15° of divergence. 30° 50° The Xtend housing cap corrects up to 25° of divergence. 2.0 mm 4.5 mm 1.0 to 6.0 mm gingiva height 2.5 mm
Article Art. no. Ø GH CONELOG® ODSecure® Abutment Material Titanium alloy C2273.3310 3.3 mm 1.0 mm C2273.3320 2.0 mm C2273.3330 3.0 mm C2273.3340 4.0 mm C2273.3350 5.0 mm C2273.3360 6.0 mm C2273.3810 3.8 mm 1.0 mm C2273.3820 2.0 mm C2273.3830 3.0 mm C2273.3840 4.0 mm C2273.3850 5.0 mm C2273.3860 6.0 mm C2273.4310 4.3 mm 1.0 mm C2273.4320 2.0 mm C2273.4330 3.0 mm C2273.4340 4.0 mm C2273.4350 5.0 mm C2273.4360 6.0 mm C2273.5010 5.0 mm 1.0 mm C2273.5020 2.0 mm C2273.5030 3.0 mm C2273.5040 4.0 mm C2273.5050 5.0 mm C2273.5060 6.0 mm Product detail ODSecure abutments New
Article Quantity Color Retention Divergence Art. no. ODSecure® attachment for Multi-unit abutment Ø 4.8 mm Material Titanium alloy 1 - - - J2273.4801 ODSecure® Xtend housing cap incl. Lab Processing Insert Material Titanium alloy / Nylon 2 yellow anodized - 0°–50° ODS-XH ODSecure® Housing cap incl. Lab Processing Insert Material Titanium alloy / Nylon 2 pink anodized - 0°–30° ODS-HCPM ODSecure® Retention cap insert Material Nylon 4 purple HARD ca. 6 lbs / 2.7 kg - ODSRC-V 4 clear MEDIUM ca. 4 lbs / 1.8 kg - ODSRC-C 4 pink SOFT ca. 2.5 lbs / 1.2 kg - ODSRC-P 4 yellow EXTRA SOFT ca. 1.5 lbs / 0.6 kg - ODSRC-Y ODSecure® Lab processing insert Material Nylon 4 black - - ODS-PM ODSecure® Impression coping Material Stainless steel / Nylon 2 - - - ODSIC ODSecure® Castable male burnable Material Polystyrene 2 - - - ODSCM Accessories
Product detail Accessories Article Quantity Color Art. no. ODSecure® Assortment kit Material Titanium alloy / Nylon / Silicone 2 - ODS-CAK ODSecure® Block-out spacer Material Silicone 4 clear ODS-BS ODSecure® Analog Material Titanium alloy 2 - ODSA ODSecure® Cap extractor tool Material Stainless steel / Nylon 1 - ODSCT The ODSecure Assortment Kit contains a variaty of different components such as a housing cap with four retention cap inserts, a lab processing insert and a block-out spacer.
Rights to change reserved · M-1920-FLY-EN-BLX-BHCL-00-092025 BioHorizons Camlog Benelux B.V. Pelmolenlaan 1 | 3447 GW Woerden | Nederland info@camlog.nl | www.biohorizonscamlog.nl Customer Service Tel +31 (0)348 820 010 | info@camlog.nl Headquarters CAMLOG Biotechnologies GmbH | Margarethenstr. 38 | 4053 Basel | Switzerland Phone +41 61 565 41 00 | Fax +41 61 565 41 01 | info@camlog.com | www.bhclgroup.com All product names, whether or not appearing in large print or with the trademark symbol, are trademarks of BioHorizons Inc. or CAMLOG Biotechnologies GmbH, its affiliates, related companies or its licensors, unless otherwise noted. Manufacturer of ODSecure® products:* BioHorizons | 2300 Riverchase Center | Birmingham, AL 35244 | USA ALTATEC GmbH | Maybachstr. 5 | 71299 Wimsheim | Germany * This document refers to products from various approved manufacturers. Please refer to the respective product label for manufacturer identification. Valid from September 2025
www.camlog.comRkJQdWJsaXNoZXIy MTE0MzMw