Guide System for CAMLOG® and CONELOG® SCREW-LINE implants
Guide System – safe implantation and immediate temporary restoration All benefits at a glance Clearly structured system due to small number of required parts: color-coded single patient drills, gingiva punches, insertion posts and guiding sleeves Convenient to use, as additional sleeves and depth stops are not required Choice between several planning systems Consistent implementation of all advantages of software-based 3D implant planning Accurate preparation of temporary restoration and its immediate integration No investment in an instrument tray necessary Optimal edge holding and hygiene of the cutting instruments due to sterility and single use For further information see: www.biohorizonscamlog.com/ conelog-guide-system Guide System – optimally matched components The components of the Guide System serve the template guided preparation of the implant bed and insertion of CAMLOG and CONELOG SCREW-LINE implants with a screw-retained insertion post, in a partially or fully edentulous upper and lower jaw. The Guide System comprises: Surgical instruments for template-guided bone or tooth-supported implant bed preparation and implant insertion CAMLOG SCREW-LINE implants including screw-retained insertion post in the following dimensions: CONELOG SCREW-LINE implants including screw-retained insertion post in the following dimensions: Length Ø 3.3 mm Ø 3.8 mm Ø 4.3 mm 9 mm – x x 11 mm x x x 13 mm x x x 16 mm x x x Length Ø 3.3 mm Ø 3.8 mm Ø 4.3 mm 7 mm – x x 9 mm x x x 11 mm x x x 13 mm x x x 16 mm x x x Screw-retained insertion post, color-coded Guiding sleeve, color-coded, upper edge of sleeve with circular hole (no groove) CAMLOG and CONELOG SCREW-LINE implants, including pre-mounted/ screw-retained insertion posts with guiding shaft and depth stop for precise insertion to planned placement depth Insertion tool with ISO shaft for implant insertion with angled hand piece Insertion tool/ with wrench connection for manual implant insertion
Temporary restoration option immediately after implantation Due to the precise 3D planning option of the implant positions, the temporary restoration can already be fabricated prior to surgery with the aid of the drilling template and the screw-retained insertion posts for lab analogs. This means that the patient can be restored temporarily immediately after surgery. Precision with 3D planning – safety for patients and users 3D planning with an implant planning software and implementation with the Guide System offers the user predictable and safe implant bed preparation and implantation. All physiological structures can be considered while planning the implant positioning. Drilling template with depth stop The Guide System guiding sleeves can be integrated in the drilling templates, which are fabricated via conventional techniques in the laboratory or with the aid of computer-guided methods such as CNC milling, stereo lithography, or 3D printing. After completion, the drill template serves to: position lab analogs during preoperative fabrication of the model and the temporary restoration; guiding surgical instruments of the Guide System during implant bed preparation; guiding SCREW-LINE implants with screw-retained insertion posts during their insertion. * Lekholm & Zarb, 1985 Pre and form drills for reliable guidance – even at greater drilling depths – through stepwise preparation of the implant bed to the planned placement depth Form Drill Cortical Bone, for optional use in bone classes 1 and 2* Pilot drills for optional use in lateral bone condensation or to ensure correct alignment of the drilling axis under difficult anatomical circumstances Guided gingiva punch for transgingival minimal invasive preparation of the soft tissue All surgical drills are fitted with circumferential color coding on the shaft and laser markings with length and diameter to ensure fast and clear assignment.
Subject to changes · M-1312-FLY-EN-INT-BHCL-00-032022 Headquarters CAMLOG Biotechnologies GmbH | Margarethenstr. 38 | 4053 Basel | Switzerland Phone +41 61 565 41 00 | Fax +41 61 565 41 01 | info@camlog.com | www.biohorizonscamlog.com Manufacturer of CAMLOG® and CONELOG® products: ALTATEC GmbH | Maybachstr. 5 | 71299 Wimsheim | Germany CAMLOG® and CONELOG® are registered trademarks of CAMLOG Biotechnologies GmbH. They may however not be registered in all markets.
www.biohorizonscamlog.comRkJQdWJsaXNoZXIy MTE0MzMw