Guide System – safe implantation and immediate temporary restoration All benefits at a glance Clearly structured system due to small number of required parts: color-coded single patient drills, gingiva punches, insertion posts and guiding sleeves Convenient to use, as additional sleeves and depth stops are not required Choice between several planning systems Consistent implementation of all advantages of software-based 3D implant planning Accurate preparation of temporary restoration and its immediate integration No investment in an instrument tray necessary Optimal edge holding and hygiene of the cutting instruments due to sterility and single use For further information see: www.biohorizonscamlog.com/ conelog-guide-system Guide System – optimally matched components The components of the Guide System serve the template guided preparation of the implant bed and insertion of CAMLOG and CONELOG SCREW-LINE implants with a screw-retained insertion post, in a partially or fully edentulous upper and lower jaw. The Guide System comprises: Surgical instruments for template-guided bone or tooth-supported implant bed preparation and implant insertion CAMLOG SCREW-LINE implants including screw-retained insertion post in the following dimensions: CONELOG SCREW-LINE implants including screw-retained insertion post in the following dimensions: Length Ø 3.3 mm Ø 3.8 mm Ø 4.3 mm 9 mm – x x 11 mm x x x 13 mm x x x 16 mm x x x Length Ø 3.3 mm Ø 3.8 mm Ø 4.3 mm 7 mm – x x 9 mm x x x 11 mm x x x 13 mm x x x 16 mm x x x Screw-retained insertion post, color-coded Guiding sleeve, color-coded, upper edge of sleeve with circular hole (no groove) CAMLOG and CONELOG SCREW-LINE implants, including pre-mounted/ screw-retained insertion posts with guiding shaft and depth stop for precise insertion to planned placement depth Insertion tool with ISO shaft for implant insertion with angled hand piece Insertion tool/ with wrench connection for manual implant insertion
RkJQdWJsaXNoZXIy MTE0MzMw