18 shop online at store.biohorizons.com Manual Handpiece 4mm Square Use to hand tighten straight Multi-unit abutments. Use to torque straight Multi-unit abutments. Driven by latch-type handpiece. Do not exceed 30 Ncm. Use to torque straight Multi-unit abutments. Driven by 4mm square drive handwrench, ratchet, or torque wrench. Do not exceed 30 Ncm. Use parallel pins to assess implant angulation and estimate which angled abutment is appropriate for the restoration. Each Try-in is laser marked from 1mm to 5mm to correspond with the Straight Multi-unit Abutment collar heights and can also be used as a measuring tool for OD Secure, Locator, Locator R-Tx and Ball abutment systems. Try-in is carried to the site by the handle and snaps into the implant. Each Try-in is laser marked to correspond with the Angled Multi-unit Abutment collar heights. Try-in is carried to the site by the handle and snaps into the implant. Multi-unit Try-in Abutments may be used to measure tissue thickness and verify proper prosthetic seating prior to final abutment seating. 5mm 4mm 3mm 2mm 1mm Straight abutment Laser marking 17°Angled Abutment Laser marking 30°Angled Abutment Laser marking 4mm 3mm 2.25mm 5mm 4mm 3mm Multi-unit Components Multi-unit Try-in Abutments Multi-unit Hex Adapters for Straight Abutments PXMUHAM Manual Multi-unit Hex Adapter PXMUHAH Handpiece Multi-unit Hex Adapter PXMUHAR 4mm Square Multi-unit Hex Adapter Paralleling Pins 144-100 Straight Parallel Pins 144-200 20º Angled Parallel Pin 144-230 30º Angled Parallel Pin 17° Angled 30° Angled platform TRYTP3MU17 TRYTP3MU30 3.0mm TRYPYMU17 TRYPYMU30 3.5mm TRYPGMU17 TRYPGMU30 4.5mm TRYPBMU17 TRYPBMU30 5.7mm straight platform TRYTP3MU 3.0mm TRYPYMU 3.5mm TRYPGMU 4.5mm TRYPBMU 5.7mm
RkJQdWJsaXNoZXIy MTE0MzMw