23 shop online at store.biohorizons.com Locator Implant Attachments are designed for use with overdentures or partial dentures retained in whole or in part by dental implants in the mandible or maxilla. Order by cuff height to match the height of the gingival tissue. The abutment will extend above the tissue by 1.8mm to allow the Locator Male to seat completely. Order one Locator Male Processing Set for each Locator Abutment (sold in packs of 2 or 10). Can also be used with tissue-level implants. Titanium Alloy. The Male Processing Package provides 3 choices of retention. The Replacement Males (clear, pink and blue) are used to restore implants with up to 10° of divergence (20° between implants). The Extended Range Replacement Males (green and red) accommodate divergences from 10° and 20° (40° between implants), and may be purchased separately. 0 to 6mm cuff height 3.9mm 1.8mm 1.0mm 5.5mm Multi-purpose tool serves as hand driver for seating Locator Abutments onto the implants, seating tool for nylon male inserts and insert removal tool. Note: now packaged with one Locator Abutment Holder Sleeve. Use to retain and deliver the Locator Abutment using the driver portion of the Core Tool. Hand driver For hand tightening the Locator abutment Locator abutment holder For retaining and delivering the Locator abutment using the hand driver portion of the core tool. Male retention insert tool For placing the male retention inserts into the metal housing Male retention insert removal tool For removing the male retention inserts from the metal housing Locator core tool instructions L02015-013 Locator® abutment impression technique module L02015-032 Locator® abutment overdenture: chairside pickup using existing denture Locator Abutments & Components Locator Abutments Locator Components LCT Core Tool LAHS Locator Abutment Holder Sleeve (4 pack) 3.0mm platform 3.5mm platform 4.5mm platform 5.7mm platform cuff height - PYLA0 PGLA0 - 0mm TP3LA1 PYLA1 PGLA1 PBLA1 1mm TP3LA2 PYLA2 PGLA2 PBLA2 2mm TP3LA3 PYLA3 PGLA3 PBLA3 3mm TP3LA4 PYLA4 PGLA4 PBLA4 4mm TP3LA5 PYLA5 PGLA5 PBLA5 5mm TP3LA6 PYLA6 PGLA6 PBLA6 6mm (2.5mm) (3.5mm) (4.5mm) (5.5mm) (6.5mm)
RkJQdWJsaXNoZXIy MTE0MzMw