29 shop online at store.biohorizons.com Use to comfortably hold abutments for chairside or laboratory preparation. Abutments are secured to the handle with a standard abutment screw (PXAS). Comes in three sizes: 3.0, 3.5/4.5 and 5.7mm. Use PXCT to re-thread internal connection implants (Tapered Internal, Internal, Laser-Lok 3.0, Tapered Tissue Level and Single-stage), and 122-170 to re-thread Abutment for Screw abutments where the internal threads have become damaged. Requires a standard surgical Ratchet (130-000) or Hand Wrench (300-400) as a drive mechanism. † Instrument o-rings & c-rings wear out over time. If an instrument is no longer held securely by its associated driver, order a replacement ring through Customer Care. For installation and removal of cover caps, prosthetic and abutment screws. 11.5mm 6.5mm 13.5mm 8.5mm 6.25mm 12.5mm 4mm Square Manual Handpiece 19mm 6.5mm Use to lightly abrade soft tissue prior to placement of a Laser-Lok abutment, if a Laser-Lok abutment has not been used before. L02015-003 Handling of Laser-Lok abutment Prosthetic Instrumentation .050 (1.25mm) Hex Drivers 135-251 Manual Hex Driver, Short 135-351 Manual Hex Driver 135-451 Manual Hex Driver, Long 134-350 Handpiece Hex Driver 134-450 Handpiece Hex Driver, Long 300-350† 4mm Square Hex Driver 300-351† 4mm Square Hex Driver, Long 300-354† 4mm Square Hex Driver, Extra Long Abutment Prepping Handles TP3AH 3.0mm platform Analog Handle PYGAH 3.5/4.5mm platform Analog Handle PBAH 5.7mm platform Analog Handle Laser-Lok Tissue Groomer TP3TG 3.0mm platform PYTG 3.5mm platform PGTG 4.5mm platform PBTG 5.7mm platform Clean-out Tools PXCT† Implant Clean-out Tap Tool Use to comfortably hold abutments for chairside or laboratory preparation. Abutments are secured to the handle with a standard abutment screw (PXAS). Comes in three sizes: 3.0, 3.5/4.5 and 5.7mm. Laser-Lok Protective Sleeves TP3TBLS 3.0mm platform PYTBLS 3.5mm platform PGTBLS 4.5mm platform PBTBLS 5.7mm platform
RkJQdWJsaXNoZXIy MTE0MzMw