5 shop online at store.biohorizons.com Use Laser-Lok healing abutments when a Laser-Lok abutment restoration is planned to inhibit epithelial downgrowth, establish a soft tissue seal and protect the bone. When a Laser-Lok component is used and temporarily removed for impression making or other restorative procedures, keep the removed Laser-Lok component in sterile saline until reinserting into the site. abutment height Laser-Lok Hand-tighten with the .050” (1.25mm) Hex Driver. Titanium Alloy. The 3.5mm, 4.5mm and 5.7mm healing abutments are laser marked for easy intraoral identification of the prosthetic platform, emergence and height: abutment height Y = Yellow (3.5mm) platform G = Green (4.5mm) platform B = Blue (5.7mm) platform N, R or W = Narrow, Regular or Wide emergence 3 or 5 = 3mm or 5mm abutment height L = Laser-Lok 3.0 healing abutments are not laser marked due to their small size. L02015-003 Handling of Laser-Lok abutments module Y = Yellow (3.5mm) platform G = Green (4.5mm) platform B = Blue (5.7mm) platform N, R or W = Narrow, Regular or Wide emergence 1, 2, 3 or 5 = 1mm, 2mm, 3mm or 5mm abutment height 3.0 healing abutments are not laser marked due to their small size. Healing Abutments Laser-Lok Healing Abutments Standard Healing Abutments 3mm height 5mm height platform abutment diameter Narrow PYNHA3L PYNHA5L 3.5mm, Laser-Lok 4.0mm PGNHA3L PGNHA5L 4.5mm, Laser-Lok 5.0mm PBNHA3L PBNHA5L 5.7mm, Laser-Lok 6.0mm Regular TP3HA3L TP3HA5L 3.0m, Laser-Lok 3.5mm PYRHA3L PYRHA5L 3.5mm, Laser-Lok 4.5mm PGRHA3L PGRHA5L 4.5mm, Laser-Lok 5.5mm PBRHA3L PBRHA5L 5.7mm, Laser-Lok 6.5mm Wide TP3WHA3L TP3WHA5L 3.0mm, Laser-Lok 4.0mm PYWHA3L PYWHA5L 3.5mm, Laser-Lok 6.0mm PGWHA3L PGWHA5L 4.5mm, Laser-Lok 7.0mm 1mm height 2mm height 3mm height 5mm height platform abutment diameter Narrow - TP3NHA2 TP3NHA3 TP3NHA5 3.0mm 3.0mm PYNHA1 PYNHA2 PYNHA3 PYNHA5 3.5mm 4.0mm PGNHA1 PGNHA2 PGNHA3 PGNHA5 4.5mm 5.0mm PBNHA1 PBNHA2 PBNHA3 PBNHA5 5.7mm 6.0mm Regular - TP3HA2 TP3HA3 TP3HA5 3.0mm 3.5mm - PYRHA2 PYRHA3 PYRHA5 3.5mm 4.5mm - PGRHA2 PGRHA3 PGRHA5 4.5mm 5.5mm - PBRHA2 PBRHA3 PBRHA5 5.7mm 6.5mm Wide - - TP3WHA3 TP3WHA5 3.0mm 4.0mm - - TP3EWHA3 TP3EWHA5 3.0mm (extra wide) 5.0mm - - PYWHA3 PYWHA5 3.5mm 6.0mm - - PGWHA3 PGWHA5 4.5mm 7.0mm - - PBWHA3 PBWHA5 5.7mm 8.0mm Hand-tighten with the .050” (1.25mm) Hex Driver. Titanium Alloy. The 3.5mm, 4.5mm and 5.7mm healing abutments are laser marked for easy intraoral identification of the prosthetic platform, emergence and height:
RkJQdWJsaXNoZXIy MTE0MzMw