9 shop online at store.biohorizons.com 7mm PXDCS& PXDCSL PXDCSS Use with the 3inOne Abutment to form an impression coping for closed-tray, hexed-timed transfers. Hand-tighten. Titanium Alloy. Impression Components Direct Coping Screws Packaged with all Direct Pick-up Copings, except 3.0mm platform, hexed, long (TP3DCL). Short hex depth for easy removal of impression material. May also be used to maintain the screw access hole during fabrication of a screw-retained provisional prostheses. Utilizes the .050” (1.25mm) Hex Driver. Handtighten or torque to 30 Ncm depending on application. Titanium Alloy. PXDCSS Direct Coping Screw, Shallow Hex Includes a deeper hex that allows up to 7mm to be prepped without losing the hex engagement. May also be used in place of an abutment screw (PXAS) when extra length is needed, or to maintain the screw access hole during fabrication of a screw-retained provisional prostheses. Utilizes the .050” (1.25mm) Hex Driver. Hand-tighten or torque to 30 Ncm depending on application. Titanium Alloy. PXDCS Direct Coping Screw Packaged with 3.0mm platform, hexed, long (TP3DCL). PXDCSL has the same deep hex as the PXDCS and is 5mm longer than the PXDCS and the PXDCSS. May also be used in place of an abutment screw (PXAS) when extra length is needed, or to maintain the screw access hole during fabrication of a screw-retained provisional prostheses. Utilizes the .050” (1.25mm) Hex Driver. Hand-tighten or torque to 30 Ncm depending on application. Titanium Alloy. PXDCSL Direct Coping Screw, Long PXBT Ball-top Screw for Indirect Transfer Ball-top Screw for Indirect (Closed Tray) Transfer Use for traditional impressions or intra-oral scanning. PEEK (PolyEtherEtherKetone) and Titanium Alloy material. Note: Prior to scanning, verify that the scan abutment is available in the library of the design software that will be used to design the abutment. Design libraries can be downloaded from www.vulcandental.com. L02015-038 Custom (CAD/CAM) prosthetics overview module L02015-044 Snap Scan Bodies Technique module 8mm height 11mm height platform TP3SSB8 TP3SSB11 3.0mm PYSSB8 PYSSB11 3.5mm PGSSB8 PGSSB11 4.5mm PBSSB8 PBSSB11 5.7mm Snap Scan Body Fits all implant prosthetic platforms. Low profile screw head. Packaged with all two-piece abutments, except Hybrid and Angled Multiunit abutments that are packaged with the PXMUAS. Utilizes the .050” (1.25mm) Hex Driver. Titanium Alloy. Final torque: 30 Ncm. PXAS Abutment Screw Abutment Screw PXAS25 Abutment Screw (pack of 25)
RkJQdWJsaXNoZXIy MTE0MzMw