8 shop online at store.biohorizons.com 11mm 5mm 16mm Use to make an open-tray, implant-level impression. Packaged with the direct coping screw, shallow hex (PXDCSS). Non-hexed versions may also be used to fabricate multiple-unit bars. Titanium Alloy. Hand-tighten. Note: TP3DCL is packaged with the direct coping screw, long (PXDCSL). TP3DCL all other platforms Use to make a closed-tray, implant-level, hexed-timed impression. Pre-assembled with a coping screw (PXSS). Titanium Alloy. 13mm 2mm 11mm 3.0 platform all other platforms 16mm 5mm 21mm L02015-007 Closed tray technique using the indirect transfer coping module L02015-008 Fabricating a custom impression coping using the closed tray technique module L02015-005 Open tray technique using the direct pick-up coping module L02015-006 Fabricating a custom impression coping using the open tray technique module Impression Components Indirect Scoop Copings (Closed Tray) Direct Pick-up Copings (Open Tray) platform Narrow PYNISC 3.5mm PGNISC 4.5mm PBNISC 5.7mm Regular TP3ISC 3.0mm PYRISC 3.5mm PGRISC 4.5mm PBRISC 5.7mm Wide TP3WISC 3.0mm PYWISC 3.5mm PGWISC 4.5mm hexed non-hexed platform Narrow PYNDC PYNDCN 3.5mm PGNDC PGNDCN 4.5mm PBNDC PBNDCN 5.7mm Regular TP3DC TP3DCN 3.0mm TP3DCL 3.0mm, long PYRDC - 3.5mm PGRDC - 4.5mm PBRDC - 5.7mm Wide PYWDC - 3.5mm PGWDC - 4.5mm Use in the lab to represent the implant in the working cast or printed model. Not intended for use with tissuelevel implants. Titanium Alloy. Implant Analogs platform TP3IA 3.0mm PYIA 3.5mm PGIA 4.5mm PBIA 5.7mm platform TP3IA25 3.0mm (pack of 25) PYIA25 3.5mm (pack of 25) PGIA25 4.5mm (pack of 25) PBIA25 5.7mm (pack of 25)
RkJQdWJsaXNoZXIy MTE0MzMw